Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T04:42:46.550Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of High Conductive Cubic Boron Nitride Thin Films by in-situ zinc Doping

Published online by Cambridge University Press:  01 February 2011

Kenji Nose  and
Toyonobu Yoshida
Kenji Nose
Affiliation:
[email protected], The University of Tokyo, Materials Engineering, 303B Building No.4, 7-3-1 Hongo,, Bunkyo-ku,Tokyo, 113-0033, Japan, 81-3-5841-7099, 81-3-5841-7099
Toyonobu Yoshida
Affiliation:
[email protected], The University of Tokyo, Tokyo, 113-8656, Japan
Get access

Abstract

Silicon and zinc were doped to cubic boron nitride (cBN) thin films by sputtering bulk dopant sources during the film deposition. Concentrations of these two elements showed different in-plane distributions, presumably caused by the difference of the sticking probability on the growing surface. Silicon impurity did not behave as an active dopant in cBN. However, zinc doping enhanced the electric conductivity from 10−8 to 10−2 (Ω−1cm−1) as the zinc concentration increased from undoped to approximately 2 %.

Keywords

electrical propertiesdopantB
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 955: Symposium I – Advances in III-V Nitride Semiconductor Materials and Devices , 2006 , 0955-I11-01
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mieno, M. and Yoshida, T., Jpn. J. Appl. Phys. Part2 29 (7), L1175–L1177 (1990)Google Scholar
2. Ichiki, T. and Yoshida, T., Appl. Phys. Lett. 64, 851–853 (1994)Google Scholar
3. Matsumoto, S. and Zhang, W. J., Jpn. J. Appl. Phys., 39, L442–L444 (2000)Google Scholar
4. Hofsäss, H., Ronning, C., Griesmeier, U., Gross, M., Reinke, S. and Kuhr, M., Appl. Phys. Lett. 67, 46–48 (1995)Google Scholar
5. Zhang, X.W., Boyen, H.G., Deyneka, N., Ziemann, P., Banhart, F. and Schreck, M., Nature Mater. 2, 312–315 (2003)Google Scholar
6. Lu, Ming, Bousetta, A., and Bensaoula, A., Waters, K., and Schultz, J.A., Appl. Phys. Lett. 68, 622–624 (1996)Google Scholar
7. Liao, K.J., Wang, W.L., Kong, C.Y., Surface and Coating Technology 141, 216–219 (2001)Google Scholar
8. Mizuno, B., Nakaoka, H., Takase, M., Nakayama, I., U.S. Patent No. 6 784 080 (31 Aug 2004)Google Scholar
9. Nose, K., Oba, H., Yoshida, T., Appl. Phys. Lett. 89, 11 (2006)Google Scholar