Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-26T19:49:46.708Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Characterization of Fibrous Cerium Oxide Templated from Activated Carbon Fibers

Published online by Cambridge University Press:  15 February 2011

Mark Crocker ,
Uschi M. Graham ,
Rolando Gonzalez ,
Erin Morris ,
Gary Jacobs  and
Rodney Andrews
Mark Crocker
Affiliation:
University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511, U.S.A.
Uschi M. Graham
Affiliation:
University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511, U.S.A.
Rolando Gonzalez
Affiliation:
University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511, U.S.A.
Erin Morris
Affiliation:
University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511, U.S.A.
Gary Jacobs
Affiliation:
University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511, U.S.A.
Rodney Andrews
Affiliation:
University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511, U.S.A.
Get access

Abstract

High surface area cerium oxide has been prepared using a carbon templating method. Impregnation of a highly mesoporous activated carbon (Darco KB-B) with an aqueous solution of cerium nitrate, followed by carbon burn off, afforded ceria with surface area of up to 148 m2/g. According to thermogravimetric studies, ceria formation proceeds via decomposition of cerium nitrate at ca. 410 K; oxidation of the carbon template commences at the same temperature, being facilitated by the release of NO2 from the Ce compound. Use of activated carbon fibers (ACFs) as template was found to provide a simple route to fibrous cerium oxide. The lower surface areas (3 - 59 m2/g) of the resulting ceria fibers reflect the largely microporous nature of the ACFs; evidently the Ce nitrate solution is unable to penetrate their micropores. Consequently, the surface area of the ceria product is found to increase with increasing mesoporosity of the ACF template. Electron microscopy reveals that the ceria fibers are composed of highly crystalline primary particles of 5-10 nm diameter; further, the fibers display a number of interesting morphological features at the macro- and nano-scales.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 876: Symposium A – Nanoporous and Nanostructured Materials for Catalysis, Sensor and Gas Separation Applications , 2005 , R4.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kaspar, J., Fornasiero, P. and Graziani, M., Catal. Today 50, 285 (1990).Google Scholar
2. Yoo, J., Bhattacharyya, A., Radlowski, C. and Karch, J., Appl. Catal. B: Environmental 1, 169 (1992).Google Scholar
3. Trovarelli, A., C. de Leitenburg, Boaro, M. and Dolcetti, G., Catal. Today 50, 353 (1999).Google Scholar
4. Jacobs, G., Williams, L., Graham, U.M., Thomas, G.A., Sparks, D.E. and Davis, B.H., Appl. Catal. A: General 252, 107 (2003).Google Scholar
5. Liu, Y., Fu, Q. and Stephanopoulos, M. F., Catal. Today 93-95, 241 (2004).Google Scholar
6. Schwickardi, M., Johann, T., Schmidt, W. and Schüth, F., Chem. Mater. 14, 3913 (2002).Google Scholar
7. Ozawa, M. and Kimura, M., J. Mater. Sci. Lett. 9, 446 (1990).Google Scholar
8. Wakayama, H., Itahara, H., Tatsuda, N., Inagaki, S. and Fukushima, Y., Chem. Mater. 13, 2392 (2001).Google Scholar
9. Yue, Z., Pripusich-Sienkiewicz, K.E. and Economy, J., Preprints of extended abstracts, Div. of Environmental Chemistry, ACS National Meeting, N.Y., 43(2), 432 (2003).Google Scholar
10. Kim, H.J., Nam, K.H. and Shul, Y.G., Mater. Sci. Forum 439, 271 (2003).Google Scholar
11. Dong, A., Ren, N., Tang, Y., Wang, Y., Zhang, Y., Hua, W. and Gao, Z., J. Am. Chem. Soc. 125, 4976 (2003).Google Scholar
12. Kim, J.Y., Yoon, S.B. and Yu, J.-S., Chem. Commun., 790 (2003).Google Scholar
13. Kim, J.M., Kang, M., Yi, S.H., Yie, J.E., Joo, S.H. and Ryoo, R., Stud. Surf. Sci. Catal. 146 (Nanotechnology in Mesostructured Materials), 53 (2003).Google Scholar
14. Ajayan, P.M., Stephan, O., Redlich, Ph. and Colliex, C., Nature 375, 564 (1995).Google Scholar
15. Satishkumar, B.C., Govindaraj, A., Nath, M. and Rao, C.N.R., J. Mater. Chem. 10, 2115 (2000).Google Scholar
16. Summers, J.C., Houtte, S. Van and Psaras, D., Appl. Catal. B: Environmental 10, 139 (1996).Google Scholar