Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T07:42:13.988Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Characterization of Alumina based TiNn and SiCn Composites

Published online by Cambridge University Press:  11 February 2011

Mats Carlsson ,
Mats Johnsson  and
Annika Pohl
Mats Carlsson
Affiliation:
Dept. Inorg. Chem., Stockholm University, SE-106 91 Stockholm, Sweden
Mats Johnsson
Affiliation:
Dept. Inorg. Chem., Stockholm University, SE-106 91 Stockholm, Sweden
Annika Pohl
Affiliation:
Dept. Mater. Chem., The Ångström Lab., Uppsala University, SE-751 21 Uppsala, Sweden
Get access

Abstract

Ceramic composites containing 2 and 5vol. % of nanosized commercially available TiN and SiC particles in alumina were prepared via a water based slurry processing route followed by spark plasma sintering (SPS) at 75 MPa in the temperature range 1200–1600°C. Some of the samples could be fully densified by use of SPS already after five minutes at 1200°C and 75 MPa. The aim was to control the alumina grain growth and thus obtain different nano-structure types. The microstructures have been correlated to some mechanical properties; e.g. hardness and fracture toughness.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 740: Symposium I – Nanomaterials for Structural Applications , 2002 , I6.6
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Niihara, K., J. Ceram. Soc. Jpn. 99 (10) 974–982 (1991)Google Scholar
2. Gao, L., Wang, H. Z., Hong, J. S., Miyamoto, H., Miyamoto, K., Nishikawa, Y., Torre, S. D. D. L.. J. Eur. Ceram. Soc. 19 (5), 609–613 (1999)Google Scholar
3. Laarz, E., Carlsson, M., Vivien, B., Johnsson, M., Nygren, M., and Bergström, L., J. Eur. Ceram. Soc. 21, 1027–1035 (2001)Google Scholar
4. Nass, R., Albayrak, S., Aslan, M., Schmidt, H.: “Colloidal Processing and Sintering of Nanoscale TiN” in Ceramic Transactions Vol. 51, ed. Hausner, H., Messing, G. L., Hirano, S.-I., (Am. Ceram. Soc. 1995) pp 591–595.Google Scholar
5. Wäsche, R., Steinborn, G., Baader, F., Fortschrittsber. DKG (1995) pp. 151–158 (in german).Google Scholar
6. Deevi, S. C., Law, C. K., Rao, A. S., Process Technology Proceedings, 7 (Interfacial Phenom. Biotechnol. Mater. Process.) ed. Attia, Y.A., Moudgil, B.M. and Chandler, S., (Elsevier, 1988) pp. 201–215 Google Scholar
7. Anstis, G.R., Chantikul, P., Lawn, B.R. and Marshall, D.B., J. Am. Ceram. Soc. 64 (9), 533–538 (1981)Google Scholar
8. Baron, B., Kumar, C.S., Le Gonidec, G., and Hampshire, S., J. Eur. Ceram. Soc. 22, 1543–1552 (2002)Google Scholar
9. Brook, R. J. and Mackenzie, R. A. D., Mater. World 1(1), 27–30 (1993)Google Scholar