Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T15:30:19.951Z Has data issue: false hasContentIssue false
  • English
  • Français

Precise control of CVD-ZrO2 film properties based on kinetic information.

Published online by Cambridge University Press:  17 March 2011

Takashi Kawamoto  and
Yukihiro Shimogaki
Takashi Kawamoto
Affiliation:
University of Tokyo 7-3-1 Hongo Bunkyo-ku Tokyo 113-8656, Japan
Yukihiro Shimogaki
Affiliation:
University of Tokyo 7-3-1 Hongo Bunkyo-ku Tokyo 113-8656, Japan
Get access

Abstract

ZrO2 films were investigated as high-k gate insulators for possible gate dielectric applications. These thin films were deposited by chemical vapor deposition (CVD). We had investigated kinetics of ZrO2-CVD reaction system and thermal stability of ZrO2 film deposited from zirconium-tetra-tertiary-butoxide (ZTB) and tetrakis-diethylamio-zirconium (TDEAZ) as Zr source. In the case of ZTB, ZTB decomposed into two active intermediate precursors by gas phase reaction. These intermediate precursors also contributed to the film growth. The step coverage, the contents of carbon and oxygen, and film structures depended on the growth precursor contributed to the film growth. Film structures also depended on the deposition temperature. As the films subjected to the rapid thermal oxidation annealing, the film structure changed amorphous into cubic and then into monoclinic. However, in the case of the films deposited at 300°C, the film structure kept amorphous state after 900°C annealing. On the other hand, in the case of TDEAZ, TDEAZ directly deposited on the growing surface and the decomposition of TDEAZ by gas phase reaction did not exist. The films deposited by TDEAZ contained more carbon than by ZTB. The film structure kept amorphous state independent of the deposition temperature. As the films subjected to the rapid thermal oxidation annealing, the film structure changed amorphous into monoclinic and then into amorphous again. This structural change resulted from the decrease of the impurity contents of the residual nitrogen and the residual carbon and the increase of the content of silicon diffused from the substrate in the ZrO2 films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 697: Symposium P – Surface Engineering 2001--Fundamentals and Applications , January 2001 , P5.24
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Refference

[1] Lo, S. H., Buchanan, D. A., Taur, Y., and Wang, W., IEEE Electron Device Letter. 18, 209 (1997).Google Scholar
[2] Stathis, J. H., and DiMaria, D. J., Tech. Dig. Int. Electron Device Meet, 1998 167.Google Scholar
[3] Degraeve, R., Pangon, N., Kaczer, B., Nigam, T., Groeseneken, G., and Naem, A., Techn. Digest of VLSI Symp, 1999 59.Google Scholar
[4] Campbell, S. A., Gilmer, D. C., Wang, X. C., Hsieh, M. T., Kim, H. S., Gladfelter, W. L., and Yan, J., IEEE Trans. Electron Dev. 44, 104 (1997).Google Scholar
[5] Cava, R. J., and Krajewski, J. J., J. Appl. Phys, 83, 1613 (1998).Google Scholar
[6] Alers, G. B., Fleming, R. M., Wang, Y. H., Dennis, B., Pinczuk, A., Redinbo, G., Urdahl, R., Ong, E., and Hasan, Z., Appl. Phys. Lett. 72, 1308 (1998).Google Scholar
[7] Mikhaelashvili, V., Betzer, Y., Prudnikov, I., Orenstein, M., Ritter, D., and Eisenstien, G., J. Appl. Phys. 84, 6747 (1998).Google Scholar
[8] Wilk, G. D., Wallace, R. M., and Anthony, J. M., J Appl. Phys. 87, 484 (2000).Google Scholar
[9] Gusev, E. P., Coppel, M., Cartier, E., Baumwol, I. J. R., Krug, C., and Gribelyuk, M. A., Appl. Phys. Lett. 76, 176 (2000).Google Scholar
[10] Qi, Wen-Jie, Nieh, Renee, Lee, Byoung Hun, Kang, Laegu, Jeon, Yongjoo, Onishi, Katsunori, Ngai, Tat, Banerjee, Sanjay, and Lee, Jack C., IEDM. 1999, 145.Google Scholar
[11] Wilk, G. D., and Wallace, R. M., Appl. Phys. Lett. 74, 2854 (1999).Google Scholar
[12] Hubbard, D. J., and Schlom, D. G., J. Mater. Res. 11, 2757 (1996).Google Scholar
[13] Balog, M., Schieber, M., Michman, M., and Patai, S., Thin Solid Films. 47, 109 (1977).Google Scholar
[14] Kawamoto, T. and Shimonogaki, Y., presented at the 2001 SSDM meeting, Tokyo, 2001.Google Scholar
[15] Kawamoto, T. and Shimonogaki, Y., presented at the 2001 AVS meeting, San Francisco, CA, 2001.Google Scholar