Hostname: page-component-669899f699-b58lm Total loading time: 0 Render date: 2025-04-24T19:17:36.416Z Has data issue: false hasContentIssue false
  • English
  • Français

Porous Microcrystalline Silicon Solar Cells

Published online by Cambridge University Press:  15 February 2011

S. P. Duttagupta ,
S. K. Kurinec  and
P. M. Fauchet
S. P. Duttagupta
Affiliation:
Department of Electrical Engineering, University of Rochester, Rochester NY 14627
S. K. Kurinec
Affiliation:
Department of Microelectronic Engineering, R.I.T., Rochester, NY 14623
P. M. Fauchet
Affiliation:
Department of Electrical Engineering, University of Rochester, Rochester NY 14627
Get access

Abstract

We report the fabrication of photovoltaic devices by the anodization of microcrystalline silicon films on single crystal silicon substrates. The porosity of the films was varied from 20% to 60% by changing the anodization conditions. An unetched μc-Si based device was used for reference. The influence of the porosity on the series resistance (Rs), the reflectance, and the spectral response of the devices was studied in detail. In order to determine Rs, the current-voltage characteristics were analyzed, both in the dark and under illumination. We observed that the value of Rs increased from 3.1 Ω to 97 Ω and the value of the reflectance decreased from 24% to 7% when the porosity increased from 20% to 60%. Initially, an optimum device performance (fill factor of 0.53 and efficiency of 7.2%) was achieved for a porosity of 40%, which was about a 40% improvement as compared to the reference (unetched) μc-si based device. Due to a further reduction in Rs by using an intermediate ITO layer and a superior grid-contact architecture, a device efficiency of 10% has been recently achieved.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 452 , 1996 , 625
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1]Canham, L.T., Appl. Phys. Lett., 57, 1046 (1990).Google Scholar
2]Guyader, P., Joubert, P., Guendouz, M., Beau, C., and Sarret, M., Appl. Phys. Lett. 65, 1787 (1994).Google Scholar
3]Prasad, A., Balakrishnan, S., Jain, S.K., and Jain, G.C., J. Electrochem. Soc., 129, 596 (1982).Google Scholar
4]Zheng, J.P., Jiao, K.L., Shen, W.P., Anderson, W.A., and Kwok, H.S., Appl. Phys. Lett. 61, 459 (1992).Google Scholar
5]Tsuo, Y.S., Heben, M.J., Wu, X., Xiao, Y., Moore, C.A., Verlinden, P., and Deb, S.K., Mater. Res. Soc. Symp. Proc, 283, 405 (1993).Google Scholar
6]Peng, C., PhD Thesis, University of Rochester, 1995.Google Scholar
7]Boeringer, D.W. and Tsu, R., Appl. Phys. Lett., 65, 2332 (1994).Google Scholar
8]Skryshevsky, V.A., Laugier, A., Vikulov, V.A., Mat. Sci. & Engg. B, 40, 54 (1996)Google Scholar
9]Hamakawa, Y. and Okamoto, H., Amorphous Semiconductors Technology and Devices, edited by Hamakawa, Y., Vol. 16, (North Holland, Tokyo, 1985) p. 271.Google Scholar
10]Harbeke, G., Krausbauer, L., Steigmeier, E.F., Widmer, A.E., Kappert, H.F., and Neugebauer, G., J. Electrochem. Soc., 131, 675 (1984).Google Scholar
11]Maruška, H.P., Namavar, F., and Kalkhoran, N.M., Appl. Phys. Lett., 61, 1338 (1992).Google Scholar
12]Neudeck, G.W., The PN Junction Diode, (Addison-Wesley, Reading, MA, 1989).Google Scholar
13]Schroder, D.K., Semiconductor Material and Device Characterization, (John Wiley and Sons, Inc., New York, NY, 1990).Google Scholar
14]Kotnala, R.K. and Singh, N.P., Essentials of Solar Cells, (Allied Publishers Pvt. Ltd., New Delhi, India, 1986).Google Scholar
15]Wolf, M. and Rauschenbach, H., Adv. Energy Conver., 3, 455 (1963).Google Scholar
16]Duttagupta, S.P., Fauchet, P.M., Ribes, A.C., Tiedje, H.F., Dixon, T.E., Brodie, D.E., and Kurinec, S.K., Submitted to Solar Energy Materials and Solar Cells.Google Scholar