Article contents
Pore Seal Property of Ultra-thin Layer for Porous Low-k Films revealed by Ellipsometric Porosimetry
Published online by Cambridge University Press: 30 July 2012
Abstract
It was found for the first time that the control of the size of pore sealant is important to prevent diffusions of pore sealant into pores of porous low-k films and to achieve a good toluene seal property. Two pore sealants (PS-A, B) were prepared and the seal property and porous structure were studied using toluene based ellipsometric porosimetry (EP) measurements. It was revealed that small pore sealant (PS-B) diffuses into pores of porous low-k (PLK) films and did not show any seal property, while large pore sealant (PS-A) does not diffuse into pores of porous low-k films and shows a good toluene seal property. Ellipsometry shows that PS-A forms conformal layer only on the vicinity of surface of porous low-k films, but porous structure of porous low-k films at the bottom part is kept, according the fact that the refractive index did not increase.
Furthermore, we developed a new pore seal material (PS-C) to form ultra-thin conformal layer by a single pass, which shows a good toluene seal property. The dielectric constant increased from 2.10 to 2.25 by covering with PS-C. The obtained layer also shows the effect as the protect layer of porous low-k films from plasma damages.
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2012
References
REFERENCES
- 1
- Cited by