Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-19T12:22:23.870Z Has data issue: false hasContentIssue false

Polarized Electroluminescence in Double Layer LEDs with Perpendicularly Oriented Polymers

Published online by Cambridge University Press:  21 March 2011

A. Bolognesi
Affiliation:
Istituto di Chimica delle Macromolecole, CNR, Via E. Bassini 15, 20133 Milano, Italy
C. Botta
Affiliation:
Istituto di Chimica delle Macromolecole, CNR, Via E. Bassini 15, 20133 Milano, Italy
D Facchinetti
Affiliation:
Istituto di Chimica delle Macromolecole, CNR, Via E. Bassini 15, 20133 Milano, Italy
M. Jandke
Affiliation:
Makromolekulare Chemie I, Univerität BayreuthD-95440 Bayreuth, Germany
P. Strohriegl
Affiliation:
Makromolekulare Chemie I, Univerität BayreuthD-95440 Bayreuth, Germany
K. Kreger
Affiliation:
Makromolekulare Chemie I, Univerität BayreuthD-95440 Bayreuth, Germany
S. Blumstengel
Affiliation:
Dip. Scienza dei Materiali, Università BicoccaVia Cozzi 53, 20125 Milano, Italy
Get access

Abstract

We have prepared and characterized a light emitting diode (LED) with the active film formed by two polymers emitting in two different regions: in the yellow-green and in the red range of the visible spectrum. The two polymers are polyparaphenylenevinylene (PPV) and poly[3-(6-methoxyhexyl)thiophene] (P6OMe) respectively. P6OMe was spin coated on a PPV layer previously oriented and was also oriented by means of the rubbing technique in the direction perpendicular to the PPV orientation. The polarized electroluminescence obtained from this device shows yellow-green emission from PPV, or red from P6OMe depending on the orientation of the analyzer.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bradley, D.D.C., Friend, R.H., Lindenberger, H., Roth, S., Polymer 27, 1709 (1986).Google Scholar
2. Friend, R.H., Gymer, R.W., Holmes, A.B., Burroughes, J.H., Matks, R.N., Taliani, C., Bradley, D.D.C., Santos, D.A. Dos, Brédas, J.L., Lögdlun, M. and Salaneck, W.R., Nature 397, 121(1999).Google Scholar
3. Grell, M., Bradley, D.D.C., Inbasekaran, M. and Woo, E.P., Adv. Mater. 9, 798 (1997).Google Scholar
4. Grell, M. and Bradley, D.D.C., Adv. Mater. 11, 895 (1999).Google Scholar
5. Bolognesi, A., Botta, C., Martinelli, M. and Porzio, W., Organic Electronics 1, 27 (2000).Google Scholar
6. Jandke, M., Strohriegl, P., Gmeiner, J., Brütting, W. and Schwoerer, M., Adv. Mater. 11, 1518 (1999).Google Scholar
7. Bolognesi, A., Porzio, W., Bajo, G., Zannoni, G. and Fanning, L., Acta Polymerica 50, 151(1999).Google Scholar