Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T07:57:29.168Z Has data issue: false hasContentIssue false
  • English
  • Français

Photochemical Deposition of Transparent Low Refractive Index SiO2 Topcoat for Laser Head at Room Temperature

Published online by Cambridge University Press:  01 February 2011

Y. Tezuka  and
M. Murahara
Y. Tezuka
Affiliation:
Department of Electrical Engineering, Tokai University 1117. Kitakaname, Hiratsuka, Kanagawa 259–1292, JAPAN
M. Murahara
Affiliation:
Department of Electrical Engineering, Tokai University 1117. Kitakaname, Hiratsuka, Kanagawa 259–1292, JAPAN
Get access

Abstract

A transparent, low refractive index SiO 2 film was photo-chemically laminated on a glass slab laser head by the Xe2* excimer lamp in the atmosphere of NF3 and O2 mixed gas at room temperature; which made it possible to inhibit the decrease in the laser output power caused by the evanescent wave leakage.

The transparent SiO2 film of 260nm thickness was laminated on the non-heated substrate by the lamp irradiation for one hour. The hardness of the film before annealing was 3 by Mohs’ Scale of Hardness, and its hardness improved to 5 after annealing at 250 degrees centigrade for one hour. The refractive index of the film was 1.42, being lower than the index of silica glass that is 1.46. Furthermore, the transmittance in the visible region increased by 2% with it s antireflection coating.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 843: Symposium T – Surface Engineering-Fundamentals and Applications , 2004 , T3.18
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Calmes, C., Bouchier, D., Debarre, D., Le Thanh, V. and Clerc, C.; Thin Solid Films. Vol. 428(2003) pp. 150–155 Google Scholar
2. Kohoutek, T., Wagner, T., Orava, J., Frumar, M., Perina, V., Mackova, A., Hnatowitz, V., Vlcek, M. and Kasap, S.; Vacuum Vol. 76(2004) pp. 191–194 Google Scholar
3. Iizuka, H. and Murahara, M.; Mat. Res. Soc. Symp. Proc. Vol. 98–23(1999) pp. 446–451.Google Scholar
4. Aomori, S. and Murahara, M.; Mat. Res. Soc. Symp. Proc. Vol. 236(1992) pp. 9–14.Google Scholar
5. Suzuki, T. and Murahara, M.; Mat. Res. Soc. Symp. Proc. Vol. 446(1997) pp. 285–290.Google Scholar
6. Okamoto, T., Iizuka, H., Ito, S. and Murahara, M.; Mat. Res. Soc. Symp. Proc. Vol. 495(1998) pp. 401–406.Google Scholar
7. Tokunaga, H., Ogawa, Y. and Murahara, M.; Mat. Res. Soc. Symp. Proc. Vol. 700(2001) pp. 185–191.Google Scholar
8. Ogawa, Y. and Murahara, M.; Mat. Res. Soc. Symp. Proc. Vol. 750(2003) pp.419–424 Google Scholar