Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-23T14:06:32.708Z Has data issue: false hasContentIssue false

Phase-Separations of Coherent Precipitates of Ordered Phases in Elastically Constrained Alloys

Published online by Cambridge University Press:  26 February 2011

Minoru Doi
Affiliation:
[email protected], Nagoya Institute of Technology, Department of Materials Science and Engineering, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Japan
Hiroshi Kumagai
Affiliation:
[email protected], Nagoya Institute of Technology, Department of Materials Science and Engineering, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Japan
Kanako Nakashima
Affiliation:
[email protected], Nagoya Institute of Technology, Department of Materials Science and Engineering, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Japan
Takao Kozakai
Affiliation:
[email protected], Nagoya Institute of Technology, Department of Materials Science and Engineering, Gokiso-cho, Showa-ku, Nagoya, 466-8555, Japan
Get access

Abstract

Phase-separations of coherent precipitates of ordered phases were investigated by means of transmission electron microscopy (TEM) and the theoretical analysis from a thermodynamic point of view. When the two-phase microstructures of A1+L12 in elastically constrained Ni-Al-Ti and Ni-Si-Fe alloys are isothermally heated inside the two-phase region of A1+L12 , coherent L12 precipitate particles sometimes exhibit a phase-separation and A1 phase newly appears and grows in L12 particles. Phase-separations of the same type as the above are also observed in coherent two-phase microstructures of A2+D03 and A2+B2 in elastically constrained Fe-Si-V and Fe-Al-Ni alloys respectively: coherent D03 or B2 precipitates exhibit a phase-separation and A2 phase newly appears and grows in both precipitates. Such phase-separation is realized under the influence of chemical free energy and elastic energies.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Khachaturyan, A. G., Theory of Structural Transformations in Solids, John Wiley and Sons, NY, (1983).Google Scholar
2. Doi, M., Prog. Mater. Sci. 40, 79 (1996).Google Scholar
3. Johnson, W. C., and Cahn, J. W. (with P. W. Voorhees) in The Selected Works of John W. Cahn, edited by W. C. Carter and W. C. Johnson, (TMS, 1998), pp. 437449.Google Scholar
4. Fratzl, P., Penrose, O., and Lebowitz, J. L., J. Stat. Phys. 95, 1429 (1999).Google Scholar
5. Koyama, T., Doi, M., and Naito, S., Mat. Res. Soc. Symp. Proc. 646, N2.2.1–N2.2.6 (2001).Google Scholar
6. Doi, M., Kozakai, T., Koyama, T., and Naito, S. in Ti-2003, Science and Technology, Vol. 2, edited by Lütjering, G. and Albrecht, J., (Wiley-VCH, 2004), pp. 10751082.Google Scholar
7. Doi, M., Koyama, T., and Kozakai, T. in 4th Pacific Rim Inter. Conf. on Advanced Materials and Processing (PRICM4), edited by S. Hanada et al., (Jpn. Inst. Metals, 2001), pp. 741744.Google Scholar
8. Doi, M., Miyazaki, T., and Wakatsuki, T., Mater. Sci. Eng. 67, 247 (1984).Google Scholar
9. Doi, M., Inagawa, Y., Koyama, T., and Miyazaki, T., Philos. Mag. Lett. 73, 331 (1996).Google Scholar
10. Maebashi, T., and Doi, M., Mater. Sci. Eng. A 373, 72 (2004).Google Scholar
11. W. H.-Tian, Sano, T., and Nemoto, M., J. Jpn. Inst. Metals 53, 1013 (1989) [in Japanese].Google Scholar