Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-29T10:32:53.728Z Has data issue: false hasContentIssue false
  • English
  • Français

Phases and Microstructures of Carbon-Implanted Niobium

Published online by Cambridge University Press:  25 February 2011

J. S. Huang ,
R. G. Musket  and
M. A. Wall
J. S. Huang
Affiliation:
Lawrence Livermore National Laboratory, Livermore, CA 94550
R. G. Musket
Affiliation:
Lawrence Livermore National Laboratory, Livermore, CA 94550
M. A. Wall
Affiliation:
Lawrence Livermore National Laboratory, Livermore, CA 94550
Get access

Abstract

Polycrystalline niobium was implanted with 200, 100, and 50 keV carbon ions to create a uniform distribution of carbon over a thickness of about 0.25 μm. Samples implanted with calculated carbon content of 0.6, 1.9, 5.8, and 16 atomic percent were prepared, and the uniformity of the carbon distribution with depth was confirmed by Auger electron spectroscopy analysis. Glancing-angle X-ray diffraction analysis and transmission electron microscopy were used to characterize the phases and microstructures formed. The results indicated that no detectable second phases were present except on the surfaces where an amorphous phase and many particles were formed from contamination. Despite the low equilibrium solubility limit of carbon in Nb, we have created metastable solid solutions of Nb and C with carbon contents as high as 16 at.%.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 128: Symposium A – Processing and Characterization of Materials Using Ion Beams , 1988 , 327
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pedraza, A.J. and Pedraza, D., Nucl. Instr. Methods Phys. Res. B16, 270 (1986).Google Scholar
2. Ziegler, Z.F., Biersack, J.P., and Littmark, U., The Stopping and Range of Ions in Solids, Vol. 1.(Pergamon Press, New York, 1985).Google Scholar
3. Davis, L.E., MacDonald, N.C., Palmberg, P.W., Riach, G.E., and Weber, R.E., Handbook of Auger Electron Spectroscopy, 2nd edition.(Physical Electronics Industries, Eden Prairie, 1976).Google Scholar
4. Terao, N., Jpn. J. Appl. Phys. 3, 104 (1965).CrossRefGoogle Scholar
5. Rudy, E. and Brukl, C.E.., J. Am. Ceram. Soc. 50, 265 (1967).CrossRefGoogle Scholar
6. Becker, E., Z. Phys. 31, 269 (1925).Google Scholar
7. Hagg, G., Z. Phys. Chem. B 11, 152 (1930); 12, 413 (1931).Google Scholar