Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-25T15:40:21.476Z Has data issue: false hasContentIssue false
  • English
  • Français

Patterning of Hard Coatings for Incorporation of Solid Lubricant Microreservoirs

Published online by Cambridge University Press:  01 February 2011

Canan G Guleryuz  and
James Krzanowski
Canan G Guleryuz
Affiliation:
[email protected], University of New Hampshire, Mechanical Engineering, 33 College Rd., Durham, NH, 03824, United States
James Krzanowski
Affiliation:
[email protected], University of New Hampshire, Mechanical Engineering, 33 College Rd., Du rham, NH, 03824, United States
Get access

Abstract

Hard coatings containing microscopic reservoirs for solid lubricant storage have the potential to advance the development of dry, self-lubricating coatings. In the present study we have investigated several methods for fabricating hard coatings that incorporate microscopic reservoirs. These methods all involve the use of placeholders on the substrate surface that are later removed after deposition of the hard coating. One method uses a solution containing ceramic beads, while the second method uses conventional photolithography methods. Coatings using both of these methods were fabricated using TiN as the hard coating. The effectiveness of the microreservoirs for solid lubricant storage was examined by conducting pin-on-disk test using various solid lubricants, including graphite and indium. The performance of coatings with random arrangements of microreservoirs was scattered while samples with the ordered arrangements of microreservoirs all performed well. Optical microscopy examination of the wear tracks showed the microreservoirs were generally successful at trapping the graphite lubricant during wear. With a sufficient density and appropriate distribution of the microreservoirs, the significant improvements in tribological performance can be realized.

Keywords

tribologythin filmsputtering
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1054: Symposium FF – Synthesis and Surface Engineering of Three-Dimensional Nanostructures , 2007 , 1054-FF05-08
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Donnet, C., Erdemir, A., Surface & Coatings Technology, 180–181 (2004) 76.Google Scholar
2. Voevodin, A.A., Bultman, J., Zabinski, J.S., Surface and Coatings Technology 107 (1998) 12.Google Scholar
3. Endrino, J.L., Nainaparampil, J.J., Krzanowski, J.E., Scripta Materialia 47 (2002) 613.Google Scholar
4. Voevodin, A.A., Zabinski, J.S., Proc. of the WTC2005, World Tribology Congress III, September 12-16, American Society of Mechanical Engineers, Washington, D.C., 2005.Google Scholar
5. Krzanowski, J.E., Endrino, J.L., Hirschman, K., Proc. of MRS Conference, Fall Meeting,Materials Research Society, Boston, MA, 2002.Google Scholar
6. Krzanowski, J.E., Zimmerman, J.H., Proc. of the STLE/ASME Joint Tribology Conference, October 22-25, Society of Tribologists and Lubrication Engineers, Saint Antonio, TX, 2006.Google Scholar
7. Zimmerman, J.H., Guleryuz, C.G., Krzanowski, J.E., Surface & Coatings Technology, Article In Press, Corrected Proof, Available online 30 August 2007.Google Scholar
8. Krzanowski, J.E., Nunna, D., Proc. of MRS Conference, Fall Meeting, Materials Research Society, Boston, MA, 2005.Google Scholar
9. Krzanowski, J.E., Wormwood, J., Surface Coatings and Technology 201 (2006) 2952.Google Scholar