Article contents
Passivation of Defect States in Amorphous and Crystalline Si by use of Cyanide Treatment and Improvement of Solar Cell Characteristics
Published online by Cambridge University Press: 01 February 2011
Abstract
We have developed a new method of eliminating defect states in Si. This method called cyanide treatment simply includes immersion of Si in KCN solutions followed by the rinse. The contamination by potassium ions can be completely prevented by the inclusion of 18-crown-6 in the KCN solutions (crown-ether cyanide treatment). When the crown-ether cyanide treatment was performed on intrinsic amorphous Si (a-Si) films, decreases in the photo-and dark current densities with the irradiation time were completely prevented. When cyanide treatment using aqueous KCN solutions was applied to pin-junction a-Si solar cells, the conversion efficiencies measured before and after light-induced degradation became higher than those with no treatment. These improvements are attributed to the elimination of defect and defect precursor states by the reaction with cyanide ions, resulting in the formation of Si-CN bonds. From density functional calculations, Si-CN bonds are found to possess a high bond energy of 4.5 eV. Due to the high bond energy, the bonds are not ruptured by heat treatment at 800°C and upon irradiation, resulting in the thermal and irradiation stability of the cyanide treatment.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2002
References
- 5
- Cited by