Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-17T18:19:57.139Z Has data issue: false hasContentIssue false
  • English
  • Français

Parametric CFD Optimization of an APCVD Glass Coating Deposition Module

Published online by Cambridge University Press:  31 January 2011

Jiuan Wei ,
Wei Zhang ,
Tom Salagaj  and
Karlheinz Strobl
Jiuan Wei
Affiliation:
[email protected], CVD Equipment Corporation, CVD Applications Laboratory, Ronkonkoma, New York, United States
Wei Zhang
Affiliation:
[email protected], CVD Equipment Corporation, CVD Applications Laboratory, Ronkonkoma, New York, United States
Tom Salagaj
Affiliation:
[email protected], CVD Equipment Corporation, CVD Applications Laboratory, Ronkonkoma, New York, United States
Karlheinz Strobl
Affiliation:
[email protected], United States
Get access

Abstract

Atmospheric Pressure Chemical Vapor Deposition (APCVD) thin film coating process is one of the most cost efficient large area thin film coating solutions presently available on the market and can be up to 2.5 times lower in cost compared with a low pressure sputtering system. Advanced materials such as transparent conductive oxides (TCO) used for solar panel manufacturing and for energy saving (Low-E) windows already have been deposited with APCVD Tools incorporating one or more deposition modules. Thin films such as SiO2, TiO2 and F: SnO2, etc have been successfully deposited onto glass sheets. However further improvement in material efficiencies and operational cost reductions are needed to satisfy the growing demand for such highly customized materials. It is also desirable in the future to be able to deposit other material films which traditionally have not yet been available on this lower cost APCVD manufacturing platform, such as zinc oxide (ZnO).

To investigate in a quantitative manner the improvement potential for the traditional APCVD deposition module design solution we performed a multidimensional computational fluid dynamics (CFD) parametric study using ANSYS FLUENT V12. As a baseline deposition module design we used a commercially available APCVD deposition module originally developed by Watkins-Johnson for SiO2 deposition trench fill of Si wafers from TEOS, O2 and Ozone from which we could locate in previously published papers for both experiment and CFD modeling results. The CFD software enabled us to perform a full parametric APCVD deposition module design study and allowed us to quantify the efficiency and throughput gains/losses of a wide variety of design change options. The main driver for this study was to learn in a quantitative, cost efficient and time efficient manner about what system design modifications have the potential for significant precursor efficiency increase and/or deposition throughput gain for a particular APCVD deposition process. The results of this study will be utilized to accelerate our proprietary, next generation Off-line and On-line CVDgCoat™ APCVD platform development.

Keywords

chemical vapor deposition (CVD) (chemical reaction)coatingtransparent conductor
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1196: Symposium C – Large-Area Processing and Patterning for Optical. Photovoltaic and Electronic Devices-2009 , 2009 , 1196-C06-24
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Gordon, R.G., MRS BULLETIN/AUGUST 2000, 52 (2000).Google Scholar
2. Remes, Z., Vanecek, M., Yates, H.M., Evans, P., and Sheel, D.W., Thin Solid Films 517, 6287 (2009).Google Scholar
3. Dagkaldiran, Ü., Gordijn, A., Finger, F., Yates, H.M., Evans, P., Sheel, D.W., Remes, Z., and Vanecek, M., Mater Sci and Eng: B 159–160, 6 (2009).Google Scholar
4. Molloy, K.C., and Stanley, J.E., Appl. Organ. Chem. 23 (2), 62 (2009).Google Scholar
5. Kim, E.J., and Gill, W.N., J. Electrochem. Soc. 141 (12), 3462 (1994).Google Scholar
6. Coltrin, M.E., Ho, P., Moffat, H.K., and Buss, R.J., Thin Solid Films 365, 251 (2000).Google Scholar
7. Nieto, J.P., Jeannerot, L., and Caussat, B., Chem. Eng. Sci 60, 5331 (2005).Google Scholar
8. Zhou, N., Krishnan, A., Kudriavtsev, V., Brichko, Y., Fifth International Conference on Advanced Thermal Processing of Semiconductors, RTP'97, 257–268, New Orleans, LA, USA. Google Scholar
9. Li, M.H., Sopko, J.F., and MaCamy, J.W., Thin Solid Films 515, 1400 (2006).Google Scholar
10. Strater, K., RCA Review 29, 618 (1968).Google Scholar
11. Hartman, J.R., Famil-Chiriha, J., Ring, M.A., and Oneal, H.E., Comb. Flame 68, 43 (1987).Google Scholar
12. Kondo, S., Tokuhashi, K., Takahashi, A., adn Kaise, M., Combust. Sci. Tech. 139, 391406 (2000).Google Scholar
13. Miller, T.A., Wooldridge, M.S., and Bozzelli, J.W., Comb. Flame 137, 73 (2004).Google Scholar
14. Britten, J.A., Tong, J., and Westbrook, C.K., Twenty-Third Symposium (International) on Combustion/The Combustion Institute, 195–202 (1990).Google Scholar
15. Ellis, F.B. Jr., Houghton, J., J. J. Mater. Res. 4 (4), 863 (1989).Google Scholar