Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
PETROVIC, J. J.
and
VASUDEVAN, A. K.
1994.
ChemInform Abstract: Overview of High Temperature Structural Silicides.
ChemInform,
Vol. 25,
Issue. 31,
Morris, D.G.
Leboeuf, M.
and
Morris, M.A.
1998.
Hardness and toughness of MoSi2 and MoSi2–SiC composite prepared by reactive sintering of powders.
Materials Science and Engineering: A,
Vol. 251,
Issue. 1-2,
p.
262.
Yamada, K
and
Kamiya, N
1999.
High temperature mechanical properties of Si3N4–MoSi2 and Si3N4–SiC composites with network structures of second phases.
Materials Science and Engineering: A,
Vol. 261,
Issue. 1-2,
p.
270.
Baker, Adam M.
Grant, Patrick S.
Castro, Richard G.
and
Kung, Harriet
1999.
Preliminary characterisation of a plasma sprayed MoSi2/Sigma SiC fibre monotape.
Materials Science and Engineering: A,
Vol. 261,
Issue. 1-2,
p.
196.
Soo Park, Young
Butt, Darryl P.
Castro, Richard
Petrovic, John
and
Johnson, Walter
1999.
Durability of molybdenum disilicide in molten alkali borosilicate glass.
Materials Science and Engineering: A,
Vol. 261,
Issue. 1-2,
p.
278.
Kumar, K.S.
2001.
Encyclopedia of Materials: Science and Technology.
p.
4243.
Shoeib, M.
and
Maamoun, M. A.
2002.
Electroless deposition and structure of Ni‐MoSi2 composite coatings.
Tribotest,
Vol. 9,
Issue. 1,
p.
49.
Ouyang, Ti
Loh, Kian Ping
Zhang, Heng
Vittal, Jagadese J.
Vetrichelvan, M.
Chen, Wei
Gao, Xingyu
and
Wee, Andrew Thye Shen
2004.
A Surface Chemistry Route to Molybdenum Sulfide and Germanide Films Using the Single-Source Precursor Tetrakis(diethylaminodithiocarbomato)molybdate(IV).
The Journal of Physical Chemistry B,
Vol. 108,
Issue. 45,
p.
17537.
Mies, M.J.M.
Rebrov, E.V.
de Croon, M.H.J.M.
and
Schouten, J.C.
2004.
Design of a molybdenum high throughput microreactor for high temperature screening of catalytic coatings.
Chemical Engineering Journal,
Vol. 101,
Issue. 1-3,
p.
225.
Yamauchi, Akira
Yoshimi, Kyosuke
Murakami, Yoshihiro
Kurokawa, Kazuya
and
Hanada, Shuji
2007.
Oxidation Behavior of Mo-Si-B In Situ Composites.
Solid State Phenomena,
Vol. 127,
Issue. ,
p.
215.
Gao, Jian Ying
Jiang, Wan
and
Wang, Gang
2007.
The Mechanism of the Formation of MoSi<sub>2</sub> by Self-Propagating High-Temperature Synthesis.
Key Engineering Materials,
Vol. 280-283,
Issue. ,
p.
1467.
Gao, J. -Y.
and
Jiang, W.
2008.
Field-activated pressure-assisted combustion synthesis of MoSi2.
International Journal of Self-Propagating High-Temperature Synthesis,
Vol. 17,
Issue. 3,
p.
195.
Gao, J. -Y.
and
Jiang, W.
2008.
Combustion synthesis of Mo5Si3 in chemical furnace.
International Journal of Self-Propagating High-Temperature Synthesis,
Vol. 17,
Issue. 1,
p.
49.
Ai, Yun Long
Li, Yan Yan
Liu, Chang Hong
He, Wen
and
Ding, Jia Yuan
2010.
Effect of Different Compacting Processes on the Microwave Sintering Behavior of LaNbO<sub>4</sub>/MoSi<sub>2</sub> Composites.
Advanced Materials Research,
Vol. 148-149,
Issue. ,
p.
1588.
Uzunonat, Yagiz
Uzgur, Sinem Cevik
Diltemiz, S. Fehmi
Kushan, Melih Cemal
and
Ölmez, Rabia
2011.
MoSi<sub>2</sub> Composites for High Temperature Structural Applications.
Advanced Materials Research,
Vol. 214,
Issue. ,
p.
103.
Uzunonat, Yagiz
Uzgur, Sinem Cevik
Diltemiz, S. Fehmi
and
Kushan, Melih Cemal
2011.
Cyclic Oxidation Behaviour of MoSi<sub>2</sub> and MoSi<sub>2</sub>-Si<sub>3</sub>N<sub>4</sub> Composites for Aircraft Gas Turbine Elements.
Advanced Materials Research,
Vol. 214,
Issue. ,
p.
349.
Yan, Jian Hui
Tang, Si Wen
and
Xu, Jian Guang
2011.
Microstructure and Oxidation Behavior of Molybdenum Disilicide Coating Prepared by Air Plasma Sprayed.
Materials Science Forum,
Vol. 686,
Issue. ,
p.
583.
Chawla, Krishan K.
2012.
Composite Materials.
p.
197.
Hatami Ramsheh, H.
Faghihi Sani, M.A.
and
Kokabi, A.H.
2013.
Microstructure and mechanical properties of MoSi2–MoSi2 joints brazed by Ag–Cu–Zr interlayer.
Materials & Design,
Vol. 49,
Issue. ,
p.
197.
Uzunonat, Yağız
Üzgür, Sinem
and
Kushan, M.C.
2013.
New Strategies for Improvement of Structural Gas Turbine Engine Parts.
Applied Mechanics and Materials,
Vol. 325-326,
Issue. ,
p.
1368.