Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T08:04:01.631Z Has data issue: false hasContentIssue false

Orientation and Electrical Resistivity of Aluminum Oxide Films Prepared by Ion Beam Assisted Plasma Cvd

Published online by Cambridge University Press:  10 February 2011

H. Nakai
Affiliation:
Research Institute, Ishikawajima-Harima Heavy Industries Co., Ltd., 1–15, Toyosu 3-chome, Koto-ku, Tokyo 135, Japan, [email protected]
O. Harasaki
Affiliation:
Research Institute, Ishikawajima-Harima Heavy Industries Co., Ltd., 1–15, Toyosu 3-chome, Koto-ku, Tokyo 135, Japan, [email protected]
J. Shinohara
Affiliation:
Research Institute, Ishikawajima-Harima Heavy Industries Co., Ltd., 1–15, Toyosu 3-chome, Koto-ku, Tokyo 135, Japan, [email protected]
Get access

Abstract

Aluminum oxide (A12O3) films were prepared on a nickel based superalloy (Inconel 718) by ion beam assisted plasma CVD at the multiple incident angles of the ion beams to a substrate. Crystal structure of these films was analyzed by X-ray diffraction (XRD). Electrical resistance of the films was measured at temperatures ranging from room temperature to 850°C. The incident angle of the ion beams influenced the orientation of A12O3 crystals. The net integrated intensity was calculated in order to compare the intensity among the different thickness samples whose thickness is thinner than X-ray penetration depth. The electrical resistivity depends on the relative X-ray intensity of (110) and (300) of α-A12O3.

Type
Research Article
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ida, F., Shinohara, J., Kunikyo, T. and Cook, S. C. P., Proc. 18th AIAA Aerospace Ground Testing Conference,(1994)2537Google Scholar
2. Nakai, H.,Kuwahara, H., Shinohara, J., Kawaratani, T., Sassa, T. and Ikegami, Y., Nucl. Instrum. Methods Phys. Res. Sect.B.112(1996)280Google Scholar
3. Nakai, H., Shinohara, J., Sassa, T. and Ikegami, Y., NucI. Instrum. Methods Phys. Res. Sect.B.121(1997)125Google Scholar
4. Kuratani, N., Murakami, Y., Imai, O., Ebe, A., Nishiyama, S. and Ogata, K., J.Vac.Sci. Technol. A15(1997)Google Scholar