No CrossRef data available.
Article contents
Optofluidic Waveguiding for Biomedical Sensing
Published online by Cambridge University Press: 30 December 2014
Abstract
We review an optofluidic waveguiding lab-on-a-chip used to sense bioparticles. The sensor uses a liquid filled Anti-Resonant Reflecting Optical Waveguide (ARROW) that is interfaced with standard ridge waveguides. The ridge waveguides are coupled to off-chip lasers and detectors via optical fiber. A perpendicular intersection between the ARROW and a ridge waveguide is especially useful for detecting fluorescently tagged particles. Light coupled into the ridge waveguide can fluorescently excite these particles within a very small volume. Fluorescent signal can then be guided within the ARROW and subsequently off chip to a detector.
We also discuss how such devices are fabricated. Both the ARROW and ridge waveguides are made using alternating thin films of tantalum oxide and silicon dioxide on silicon substrates. These thin films are deposited by either sputtering or plasma enhanced chemical vapor deposition (PECVD). The waveguides are patterned using a combination of standard photolithographic processes, reactive ion etching, and sacrificial etching. Low-loss optical guiding is very dependent on both the waveguide structure and the materials used. The latest processes for maximizing detection sensitivity are reviewed.
We also present results using the optofluidic waveguiding sensor for detecting a variety of different types of particles such as fluorescently labeled nanobeads, viruses, ribosomes, and RNA.
- Type
- Articles
- Information
- MRS Online Proceedings Library (OPL) , Volume 1720: Symposium D – Materials and Concepts for Biomedical Sensing , 2014 , mrsf14-1720-d06-01
- Copyright
- Copyright © Materials Research Society 2014
References
REFERENCES
Schmidt, H. and Hawkins, A.R.,
The photonic integration of non-solid media using optofluidics
. Nature Photonics, 2011. 5(10): p. 598–604.CrossRefGoogle Scholar
Fan, X.D. and White, I.M.,
Optofluidic microsystems for chemical and biological analysis
. Nature Photonics, 2011. 5(10): p. 591–597.CrossRefGoogle ScholarPubMed
Erickson, D., et al. .,
Nanobiosensors: optofluidic, electrical and mechanical approaches to biomolecular detection at the nanoscale
. Microfluidics and nanofluidics, 2008. 4(1-2): p. 33–52.CrossRefGoogle ScholarPubMed
Ryckeboer, E., et al. .,
Glucose sensing by waveguide-based absorption spectroscopy on a silicon chip
. Biomedical Optics Express, 2014. 5(5): p. 1636–1648.CrossRefGoogle ScholarPubMed
Yin, D.L., et al. .,
Single-molecule detection sensitivity using planar integrated optics on a chip
. Optics Letters, 2006. 31(14): p. 2136–2138.CrossRefGoogle ScholarPubMed
Yin, D.L., et al. .,
Planar optofluidic chip for single particle detection, manipulation, and analysis
. Lab on a Chip, 2007. 7(9): p. 1171–1175.CrossRefGoogle ScholarPubMed
Duguay, M.A., et al. .,
Antiresonant Reflecting Optical Wave-Guides in Sio2-Si Multilayer Structures
. Applied Physics Letters, 1986. 49(1): p. 13–15.CrossRefGoogle Scholar
Parks, J.W., et al. .,
Hybrid optofluidic integration
. Lab on a Chip, 2013. 13(20): p. 4118–4123.CrossRefGoogle ScholarPubMed
Parks, J.W., et al. .,
Integration of programmable microfluidics and on-chip fluorescence detection for biosensing applications
. AIP Biomicrofluidics, 2014. 8(5).Google ScholarPubMed
Ozcelik, D., et al. .
High sensitivity fluorescence detection with multi-spot excitation using Y-splitters. in Lasers and Electro-Optics (CLEO), 2013 Conference on. 2013.CrossRefGoogle Scholar
Zhao, Y., et al. .,
Hollow waveguides with low intrinsic photoluminescence fabricated with Ta2O5 and SiO2 films
. Applied Physics Letters, 2011. 98(9).Google Scholar
Barber, J.P., et al. .,
Integrated hollow waveguides with arch-shaped cores
. Ieee Photonics Technology Letters, 2006. 18(1-4): p. 28–30.CrossRefGoogle Scholar
Yin, D.L., et al. .,
Waveguide loss optimization in hollow-core ARROW waveguides
. Optics Express, 2005. 13(23): p. 9331–9336.CrossRefGoogle ScholarPubMed
Lunt, E.J., et al. .,
Hollow ARROW Waveguides on Self-Aligned Pedestals for Improved Geometry and Transmission
. Ieee Photonics Technology Letters, 2010. 22(15): p. 1147–1149.CrossRefGoogle ScholarPubMed
Rangelow, I.W.,
Critical tasks in high aspect ratio silicon dry etching for microelectromechanical systems
. Journal of Vacuum Science & Technology A, 2003. 21(4): p. 1550–1562.CrossRefGoogle Scholar
Miao, P.D.a.J.,
Effect of SF6 flow rate on the etched surface profile and bottom grass formation in deep reactive ion etching process
. Journal of Physics: Conference Series, 2006. 34(1): p. 577–582.Google Scholar
Zhao, Y.,
Low-Photoluminescence hollow waveguide platforms for high-sensitivity integrated optical sensors, Brigham Young University. Department of Electrical and Computer Engineering, 2011. p. 1 online resource (xvi, 148 pages).Google Scholar
Schwartz, G.C. and Srikrishnan, K.V.,
Handbook of semiconductor interconnection technology2006: CRC Press.CrossRefGoogle Scholar
Zempoaltecatl, L.U., Schmidt, H., and Hawkins, A.R., Design and fabrication of silicon-based optofluidic waveguide platforms. SPIE, 2013.Google Scholar
Zhao, Y., et al. .,
Optimization of Interface Transmission Between Integrated Solid Core and Optofluidic Waveguides
. Ieee Photonics Technology Letters, 2012. 24(1): p. 46–48.Google Scholar
Holmes, M., et al. .,
Optimized piranha etching process for SU8-based MEMS and MOEMS construction
. Journal of Micromechanics and Microengineering, 2010. 20(11).Google ScholarPubMed