Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-20T01:20:48.254Z Has data issue: false hasContentIssue false
  • English
  • Français

Optical Transmittance of Thin Films of SrFeO2.5+x at Elevated Temperatures and Applications to Gas Sensing

Published online by Cambridge University Press:  15 February 2011

Michael Post  and
Jianhua Yao
Michael Post
Affiliation:
Institute for Chemical Process and Environmental Technology, National Research Council of Canada, Montreal Road, Ottawa, Ontario, K1A OR6, Canada., [email protected]
Jianhua Yao
Affiliation:
Institute for Chemical Process and Environmental Technology, National Research Council of Canada, Montreal Road, Ottawa, Ontario, K1A OR6, Canada., [email protected]
Get access

Abstract

Non-stoichiometric perovskites with the general formula SrFeO2.5+x have potential in oxygen sensing applications. Thin films of these compositions have been grown onto various substrates by pulsed laser deposition techniques. At elevated temperatures, (T > 550K), the films react rapidly and reversibly with oxygen and the bulk oxygen content, x, of the films changes. Accompanying the change in oxygen stoichiometry are significant changes in the optical transmittance and reflectance of the films. Transmission spectrophotometry in the uv-vis region has been used to determine the relationship of transmittance with oxygen composition in the gas phase. Spectrophotometric data have been obtained by a batch method and also in-situ in a flow cell at T = 690K. The data show a large variation in transmittance, exceeding 103 for the batch measurements, with SrFeO3 showing the highest opacity. The design of the flow cell is also described.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 403: Symposium I – Polycrystalline Thin Films: Structure, Texture, Properties and Applications II , 1995 , 533
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Dann, S.E., Currie, D.B., Weller, M.T., Thomas, M.F., and Al-Rawwas, A.D., J. Solid State Chem. 109, 134–144 (1994).Google Scholar
[2] Takeda, Y., Kanno, K., Takada, T., Yamamoto, O., Takano, M., Nakayama, N., and Bando, Y., J. Solid State Chem., 63 237–249 (1986).Google Scholar
[3] Post, M.L., Sanders, B. and Kennepohl, P., Sensors and Actuators B 13–14, 272–275 (1993).Google Scholar
[4] Post, M.L., Yao, J. and Sanders, B.W., Techn. Digest Papers, The 5th Int. Conf. Chemical Sensors, (Rome, Italy, July 11–14, 1994) pp. 446–449.Google Scholar
[5] Sanders, B.W. and Post, M.L., in Laser Ablation in Materials Processiing, Fundamentals and Applications, edited by Braren, B., Dubowski, J.J., and Norton, D.P. (Mater. Res. Soc. Proc. 285, Pittsburgh, PA, 1992) pp. 427–432.Google Scholar
[6] Post, M.L. and Sanders, B.W., in Chemical Sensors II, edited by Butler, M., Ricco, A. and Yamazoe, N., (Proc. 183rd Meeting Electrochem. Soc., 93–7, Hawaii, USA, May 16–21, 1993), pp. 358–362.Google Scholar