Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-23T14:30:00.830Z Has data issue: false hasContentIssue false
  • English
  • Français

Numerical Simulations for the Efficiency Improvement of Hybrid Dye-microcrystalline Silicon pin-solar cells

Published online by Cambridge University Press:  11 July 2011

Sven Burdorf ,
Gottfried H. Bauer  and
Rudolf Brüggemann
Sven Burdorf
Affiliation:
Institute of Physics, Carl von Ossietzky University Oldenburg, Carl-von-Ossietzky Str. 9-11, D-26129 Oldenburg, Germany.
Gottfried H. Bauer
Affiliation:
Institute of Physics, Carl von Ossietzky University Oldenburg, Carl-von-Ossietzky Str. 9-11, D-26129 Oldenburg, Germany.
Rudolf Brüggemann
Affiliation:
Institute of Physics, Carl von Ossietzky University Oldenburg, Carl-von-Ossietzky Str. 9-11, D-26129 Oldenburg, Germany.
Get access

Abstract

In hybrid solar cells consisting of dye sensitizers incorporated in the i-layer of a microcrystalline silicon (μc-Si:H) pin solar cell the dye sensitizer molecules are embedded in the matrix and enhance the overall absorption of the dye-matrix system due to their high absorption coefficient in the spectral range interesting for photovoltaic applications. This contribution investigates the efficiency improvement of hybrid dye-μc-Si:H solar cells compared to pure μc-Si:H solar cells by simulation. The results indicate that, under optimum conditions, the efficiency can be improved by more than a factor of 1.2 compared to a pure μc-Si:H cell. The thickness reduction for the hybrid system can be as large as 50 % for the same efficiency. However, the efficiency improvement also depends on the amount of additionally induced defects in the matrix by the embedded dye molecules. Therefore, the simulations investigate the performance of the hybrid solar cell for different absorption enhancements and defect densities.

Keywords

photovoltaicthin filmcomposite
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1322: Symposium B – Third-Generation and Emerging Solar-Cell Technologies , 2011 , mrss11-1322-b08-08
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mayer, T., Weiler, U., Kelting, C., Schlettwein, D., Makarov, S., Wöhrle, D., Abdallah, O., Kunst, M., and Jaegermann, W., Sol. Energy Mater. Sol. Cells 91, 1873 (2007).Google Scholar
2. Mayer, T., Weiler, U., Mankel, E., Jaegermann, W., Kelting, C., Schlettwein, D., Baziakina, N., and Wöhrle, D., Renewable Energy 33, 262 (2008).Google Scholar
3. Burgelman, M., Nollet, P., and Degrave, S., Thin Solid Films 361–362, 527 (2000).Google Scholar
4. Decock, K, Khelifi, S., and Burgelman, M., Thin Solid Films (to be published, http://dx.doi.org/10.1016/j.tsf.2010.12.039).Google Scholar