Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-29T07:43:27.224Z Has data issue: false hasContentIssue false
  • English
  • Français

Nondestructive Characterization of RIE Induced Radiation Damage Using Surface Acoustic Wave

Published online by Cambridge University Press:  21 February 2011

H. Gilboa ,
W. Hata ,
K. O'Donnell ,
M. Tabib-Azar  and
P. Das
H. Gilboa
Affiliation:
Materials Research Corporation, Orangeburg, NY 10962
W. Hata
Affiliation:
Materials Research Corporation, Orangeburg, NY 10962
K. O'Donnell
Affiliation:
Materials Research Corporation, Orangeburg, NY 10962
M. Tabib-Azar
Affiliation:
Electrical, Computer and Systems Engineering Department, Rensselaer Polytechnic Institute Troy, NY 12181
P. Das
Affiliation:
Electrical, Computer and Systems Engineering Department, Rensselaer Polytechnic Institute Troy, NY 12181
Get access

Abstract

Reactive ion etching (RIE) is extensively used as a high resolution pattern transfer process for fabrication of silicon devices. In this work dry etching radiation damage in p-type boron doped, silicon wafers was investigated using a nondestructive surface acoustic wave (SAW) technique. The transverse acoustoelectric voltage (TAV) is monitored across the silicon wafer which is placed in proximity of a SAW delay line. TAV is developed due to the nonlinear interaction between the electric field accompanying SAW and the free carriers near the silicon surface. TAV versus bias voltage (applied across the semiconductor) was obtained to measure the flatband voltage (VFB) shift. The flatband voltage shift of the etched wafer was determined as a measure of the amount of surface charge introduced into the surface by ion bombardment. SiO2 films were etched in C4 F8 and C2 H2 with 2 W/cm2 input power. The ion energy was determined by the self bias dc voltage developed on the cathode. It is shown that a magnetron RF discharge introduces an order of magnitude less damage than non-magnetron discharge.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 38: Symposium F – Plasma Synthesis and Etching of Electronic Materials , 1984 , 511
Copyright
Copyright © Materials Research Society 1985

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Eprath, L. M. and Dimaria, D. J.. “Review of RIE Induced Radiation Damage in Silicon Dioxide,” Solid State Technol., April 1981.CrossRefGoogle Scholar
2. Pang, S. W.. “Dry Etching Induced Damage in Si and GaAs,” Solid State Technol., April 1984.Google Scholar
3. Pang, S. W. etal. “Damage Induced in Si by Ion Milling or Reactive Ion Etching,” J. Appl. Phys. 54(6), June 1983.Google Scholar
4. Gdula, R. A.. “The Effect of Processing on Radiation Damage in SiO2 ,” IEEE E.D., 26(4), 1979.Google Scholar
5. Fonash, S. J., Ashok, S. and Singer, R.. “Effect of Neutral Ion Beam Sputtering and Etching on Silicon,” Thin Solid Film, 90, 1982.Google Scholar
6. Ashok, S. and Mogro-Campero, A.. “Silicon Schottky-Barrier Modification by Ion Implanatation Damage,” IEEE ED Letters, EDL–5, 2, 1984.Google Scholar
7. Gilboa, H. and Das, P.. “Non-destructive Evaluation of Electrical Properties of Semiconductor using SAW,” Technical Report MA-OVR-15, RPI, Troy, NY, July 1977.Google Scholar
8. Davari, B. and Das, P.. “Semiconductor Surface Characterization Using TAV Versus Voltage Measurements,” J. AppI. Phys., 54(1), 1983.Google Scholar