Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-20T02:41:37.400Z Has data issue: false hasContentIssue false
  • English
  • Français

Neutron Measurement of Residual Stresses in a Used Railway Rail

Published online by Cambridge University Press:  21 February 2011

P.J. Webster ,
K.S. Low ,
G. Mills  and
G.A. Webster
P.J. Webster
Affiliation:
Department of Civil Engineering, University of Salford, Salford, M5 4WT, UK
K.S. Low
Affiliation:
Department of Civil Engineering, University of Salford, Salford, M5 4WT, UK
G. Mills
Affiliation:
Department of Civil Engineering, University of Salford, Salford, M5 4WT, UK
G.A. Webster
Affiliation:
Department of Mechanical Engineering, Imperial College, London, SW7 2AZ, UK
Get access

Abstract

The high resolution neutron diffraction technique has been applied to determine, non-destructively, the residual stress distribution developed in the head of a railway rail after normal service.

Measurements were made, using the neutron strain scanner at the Institut Laue Langevin, Grenoble, on a transverse slice of rail 12mm thick taken from a section of straight track. The rail head was scanned in the three principal orientations in a series of parallel traverses sufficiently close to enable a two- dimensional matrix of data to be accumulated and vertical, transverse and longitudinal residual stress contours to be drawn.

Substantial residual compressive and tensile stresses and steep stress gradients were observed related to the depth below the top surface, distance from the running line and shape of the rail head. The highest stresses and stress gradients were observed in transverse and vertical directions but significant stresses were also retained in the longitudinal (12mm thick) direction of the rail.

The results demonstrate the effectiveness and unique characteristics of the neutron technique to determine non- destructively and continuously the residual stresses inside engineering components.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 166: Symposium J – Neutron Scattering for Materials Science , 1989 , 311
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stacey, A., MacGillivray, H.J., Webster, G.A. and Ziebeck, K.R.A., J. Strain Analysis 20 93–100 (1985).Google Scholar
2. Fischer, F.D., Hinteregger, E. and Rammerstorfer, F.G. in International Conference on Residual Stresses ICRS2, edited by Beck, G., Denis, S. and Simon, A. (Elsevier Applied Science, London, 1989) pp. 467–472.CrossRefGoogle Scholar
3. Webster, G.A., Bourke, M.A.M., MacGillivray, H.J., Webster, P.J., Low, K.S., Cannon, D.F. and Allen, R.J., International Conference on Residual Stresses ICRS2, edited by Beck, G., Denis, S. and Simon, A. (Elsevier Applied Science, London, 1989) pp. 203–208.Google Scholar
4. Urashima, C., Nishida, S. and Yawata, K.S. in International Conference on Residual Stresses ICRS2, edited by Beck, G., Denis, S. and Simon, A. (Elsevier Applied Science, London, 1989) pp. 912–918.Google Scholar
5. Schilling, C.G. and Blake, G.T., United States Steel Report No. R-477, 1981.Google Scholar
6. Allen, A.J., Hutchings, M.T. and Windsor, C.G., Adv. Phys. 34 445–473 (1985).CrossRefGoogle Scholar
7. Smith, D.J., Leggatt, R.H., Webster, G.A., MacGillivray, H.J., Webster, P.J. and Mills, G., J. Strain Analysis 23 201–211 (1988).Google Scholar