Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-25T15:41:23.212Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanoindentation Study of Amorphous Metal Multilayered Thin Films

Published online by Cambridge University Press:  10 February 2011

J. B. Vella ,
R. C. Cammarata ,
T. P. Weihs ,
C. L. Chien ,
A. B. Mann  and
H. Kung
J. B. Vella
Affiliation:
Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, MD 21218. USA.
R. C. Cammarata
Affiliation:
Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, MD 21218. USA.
T. P. Weihs
Affiliation:
Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, MD 21218. USA.
C. L. Chien
Affiliation:
Department of Physics and Astronomy, Johns Hopkins University, Baltimore, MD 21218. USA
A. B. Mann
Affiliation:
Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, MD 21218. USA.
H. Kung
Affiliation:
Materials Science and Technology Department, Los Alamos National Lab, Los Alamos, NM 87545. USA
Get access

Abstract

Nanoindentation studies were preformed on amorphous metal, multilayered thin films containing alternating layers of Fe50Ti50 and Cu35Nb65 in order to investigate the mechanism for plastic deformation in metallic glass. Films with a total thickness of 1μm and bilayer repeat lengths ranging from 2 to 50 nm were magnetron sputter-deposited onto sapphire substrates. In contrast to many crystalline multilayered systems, where large hardness enhancements have been observed when the bilayer repeat length is reduced below about 10 nm, no significant hardness enhancement as a function of bilayer repeat length was observed in the Fe50Ti50/ Cu35Nb65 amorphous metal system. This result suggests that a dislocation–like mechanism for plastic deformation may not be appropriate for these amorphous metals.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 594: Symposium V – Thin Films - Stresses & Mechanical Properties VIII , 1999 , 25
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Polk, D. E., Gleissen, B. C., and Gardner, F. S., Mat. Sci. Eng., 23, 309 (1976).Google Scholar
2. Davis, L.A., in Metallic Glasses (American Society for Metals, Metals Park, OH, 1976) p. 190.Google Scholar
3. Li, J. C. M., Met. Trans. A., 16A, 2227 (1985).Google Scholar
4. Spaepen, F. and Turnbull, D., Scripta Metall., 8, 563 (1974).Google Scholar
5. Pampillo, C. A., J. Mater. Sci., 10, 1194 (1975).Google Scholar
6. Was, G. S. and Foecke, T., Thin Solid Films, 286, 1 (1996).Google Scholar
7. Cammarata, R.C., Thin Solid Films, 240, 82 (1994).Google Scholar
8. Cammarata, R.C., Nanomaterials: Synthesis, Properties, and Applications, ed. Edelstein, A.S. and Cammarata, R.C., (Institute of Physics Publishing, Philadelphia, 1996) pp. 117.Google Scholar
9. Oliver, W. C. and Pharr, G. M., J. Mater. Res., 7, 1564 (1992).Google Scholar