Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-27T00:07:24.362Z Has data issue: false hasContentIssue false
  • English
  • Français

Modeling FEBEX Large-Scale In Situ Test

Published online by Cambridge University Press:  10 February 2011

A. Gens ,
E.E. Alonso ,
A. Garcia-Molina ,
F. Huertas  and
J.L. Santiago
A. Garcia-Molina
Affiliation:
UPC, Barcelona, Spain
J.L. Santiago
Affiliation:
ENRESA, Madrid, Spain
Get access

Abstract

This paper reports the coupled thermo-hydro-mechanical (THM) analyses of the “in situ” test carried out during the pre-operational stage of the FEBEX project. The determination of parameters has been performed using the results of the characterization stage and other available information. The results of the analyses provide a good understanding of expected test behaviour. This understanding is enhanced by the performance of a quite extensive programme of 1-D sensitivity analyses in which the values of critical parameters are varied. Two dimensional effects are discussed on the basis of the results of 2-D axisymmetric THM analyses carried out using a longitudinal section that provides a better representation of real test geometry.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 506: Symposium – Scientific Basis for Nuclear Waste Management XXI , 1997 , 329
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

AITEMIN, Cálculo de valores medios de los bloques de bentonita. Bentonite layers emplacement, 20.10.96. Unpublished project report; available form ENRESA.Google Scholar
AITEMIN Lectura de sensores del experimento “in situ”, (16.01.97-09.02.97). A1TEMIN, 24.02.97. Unpublished project report; available form ENRESA.Google Scholar
Alonso, E.E., Gens, A. and Josa, A., A consitutive model for partially saturated soils, Géotechnique 40, 1990, p. 405–430.Google Scholar
Finsterle, S. and Pruess, K., Solving the estimation and identification problem in two-phase flow modelling, Water Resources Research, Vol. 31, 4, 1995, p. 913–924.Google Scholar
Frieg, B. and Vomvoris, S., Investigation of hydraulic parameters in the saturated and unsaturated zone of the ventilation drift, Technical Report 93-10, Nagra, 1994.Google Scholar
García-Molina, A.J., Gens, A., Olivella, S. Alonso, E.E., A joint element for coupled hydro-thermo-mechanical analysis of porous media, 9th. Int. Conf. for Comp. Meth. and Advances in Geomechanics, 1997, Wuhan.Google Scholar
Gens, A. “Constitutive laws”. Modern issues in non-saturated soils, Gens, A., Jouanna, P. Schrefler, B.A. eds. Springer Verlag, 1995, Wien p. 129–158.Google Scholar
Guimerà, J. and Carrera, J., Nota técnica sobre las condiciones y parimetros hidrdulicos alrededor del túnel FEBEX para un modelo HTM bidimensional, Nota técnica. 70-UPC-1-1-1001, 1996, UPC. Unpublished project report; available form ENRESA.Google Scholar
Keusen, H.R., Gauguin, J. Schuler, P. Buletti, M., Grimsel Test Site. Geology, Technical Report 87-14E, 1989, Nagra.Google Scholar
Olivella, S., Gens, A., Carrera, J. and Alonso, E.E., Numerical formulation for a simulator (CODE-BRIGHT) for the coupled analysis of saline media, Engineering Computations, 13, 1996, p. 87–112.Google Scholar
Pintado, X. and Lloret, A., THM laboratory tests in FEBEX phase I, Report 70-UPC-L-3-01, 1996, UPC-DIT. Unpublished project report; available form ENRESA.Google Scholar
Schneefus, J., Glliss, F., Gommelich, G. and Schmidt, M., Grimsel test site. Heater test. Final Report, Technical Report. 88-40E, 1996, Nagra.Google Scholar
UPC Preoperational thermo-hydro-mechanical (THM) modelling of the “in situ” test, Report 70-UPC-M-3-001, 1997. Unpublished project report; available form ENRESA.Google Scholar
Villar, M.V. and Cuevas, J., Caracterización geoquímica de bentonita compactada. Efectos producidos por flujo termohidrdulico, Julio-Octubre de 1996. Informe técnico. 54A 1512196. CIEMAT. Unpublished project report; available form ENRESA.Google Scholar
Villar, M.V. and Pelayo, M., Characterization of “La Serrata” clay used in the FEBEX project, Technical Report. 54A 1411196, 1996, CIEMAT. Unpublished project report; available form ENRESA.Google Scholar