Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-05T09:56:11.174Z Has data issue: false hasContentIssue false

Microstructures of Rapidly Solidified Fe-Al-Zr Alloys

Published online by Cambridge University Press:  15 February 2011

A. N. Patel
Affiliation:
Battelle Columbus Laboratories, 505 King Avenue, Columbus, Ohio, USA
L. F. Vassamillet
Affiliation:
Battelle Columbus Laboratories, 505 King Avenue, Columbus, Ohio, USA
A. H. Clauer
Affiliation:
Battelle Columbus Laboratories, 505 King Avenue, Columbus, Ohio, USA
Get access

Abstract

Rapidly quenched short fibers of Fe–8Al and Fe– 8Al–XZr (X = 0.1, 0.2, 0.4, and 1) alloys were produced by the Pendant Drop Melt Extraction Process, (PDME) to explore the feasibility of producing intermediate temperature, oxidation resistant iron base alloys. The fibers had a diameter of 20 to 50 μm and ranged in length from 2–5 mm. The cooling rate was insufficient to retain zirconium in solution in the Zr-containing alloys, resulting in precipitates of the type Fex(Zr,Al) having differing compositions at the grain boundaries and within the matrix. No precipitates were observed in the FeAl alloys. The precipitates were uniform in distribution and size (nominally 0.1 to 0.3 μm diameter). Grain boundary precipitation and precipitate size both decreased with decreasing Zr contents.

Type
Research Article
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Carbonara, R. S., Gaspar, T. A., Raman, R. V., Maringer, R. E. and McCall, J. L. in: Review of Rapid Solidification Technology, MCIC Report 81–45, Battelle-Columbus, October 1981, p. 27.Google Scholar
2.Pearson, W. B. in: A Handbook of Lattice Spacings and Structures of Metals and Alloys, Pergamon Press, N.Y. 1958, p. 344.Google Scholar
3.Shunk, F. A. in Constitution of Binary Alloys, Second Supplement, McGraw-Hill, N.Y. 1969, p. 355.Google Scholar