Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T07:46:04.357Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure and Mechanical Properties of Cast, Homogenized and Aged NiAl Single Crystal Containing Hf

Published online by Cambridge University Press:  01 January 1992

I.E. Locci ,
R. Dickerson ,
R.R. Bowman ,
J.D. Whittenberger ,
M. V. Nathal  and
R. Darolia
I.E. Locci
Affiliation:
NASA-Lewis Research Center, Cleveland, OH 44135
R. Dickerson
Affiliation:
NASA-Lewis Research Center, Cleveland, OH 44135
R.R. Bowman
Affiliation:
NASA-Lewis Research Center, Cleveland, OH 44135
J.D. Whittenberger
Affiliation:
NASA-Lewis Research Center, Cleveland, OH 44135
M. V. Nathal
Affiliation:
NASA-Lewis Research Center, Cleveland, OH 44135
R. Darolia
Affiliation:
GE Aircraft Engines, Cincinnati, OH 45215.
Get access

Abstract

Small additions of Hf to [001] oriented single crystal NiAl are shown to be effective in improving high temperature creep strength. The presence of Hf-rich second phases and/or solid solution strengthening are responsible for the improved behavior observed at high temperatures. In the as-cast condition, large Hf-rich interdendritic regions were found. Homogenization heat-treatments (1590 K for 50 hours) substantially reduced this interdendritic segregation. TEM observations of the as-homogenized microstructure revealed fine G-phase (Ni16Hf6Si7) precipitates, with plate or cuboidal shapes. Varying the cooling rates after homogenization resulted in the refinement or complete suppression of the G-phase. Aging the homogenized material at 1300 K resulted in the formation of Heusler precipitates (β'-Ni2AlHf), preferentially nucleating at the G-phase sites. These Heusler precipitates were more stable at this or higher temperatures and coarsened at the expense of the less stable G-phase. Post-test analyses of compression tested specimens, conducted at 1200, 1300 and 1400 K, revealed extensive changes in the distribution and size of the second phases. Deformation at 1300 K appears to occur by two distinct mechanisms: at high strain rates the stress exponent is  4 while at slower rates (< 10−6s−1) a much higher exponent (∼ 12) was found. Testing at 1300 K of specimens over-aged at 1400 K reduced the creep resistance of the alloy which suggests a contribution by precipitation strengthening to the overall strength of the alloy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 685
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Darolia, R., JOM, 43, No 3, 44 (1991).Google Scholar
2. Darolia, R. et al. , in Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior, (Liu, C.T., Cahn, R.W., Sauthoff, G., eds.), NATO ASI Series, 213, Irsee, Germany, pp. 679–698 (1992).Google Scholar
3. Locci, I.E. et al. , in High Temperature Ordered Intermetallics Alloys IV, (Johnson, L.A., Pope, D.P., and Stiegler, J.O., eds.) Mat. Res. Soc. Symp. Proc., Vol. 213, Boston, Mass., pp. 1013–1018 (1991).Google Scholar
4. Takeyama, M., Liu, C.T., J. Mat. Res., 5, 1189 (1990)Google Scholar
5. Strutt, P.R. and Kear, B.H., in High Temperature ordered Intermetallic Alloys, Mat. Res. Soc. Symp. Proc., Vol. 39, pp. 279–292 (1985).Google Scholar
6. Polvani, R.S., Tzeng, Wen-Shian, and Strutt, P.R., Metall. Trans. A, 7A, 33 (1976).Google Scholar
7. Vedula, K. et al. , in High Temperature Ordered Intermetallic Alloys, (Kock, C.C., Liu, C.T., and Stoloff, N.S., eds.) Mat. Res. Soc. Symp. Proc., Vol. 39, pp. 411–421 (1985).Google Scholar
8. Whittenberger, J.D. et al. , Mater. Lett., 11, 267(1991).Google Scholar
9. Nathal, M.V., as in reference 2, pp. 541–563.Google Scholar
10. Whittenberger, J.D., J. Mater. Sci., 23, 235 (1988).Google Scholar