Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T07:24:52.720Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Evolution and Mechanical Properties of Al3-based Multi-Phase Alloys

Published online by Cambridge University Press:  21 March 2011

Seiji Miura ,
Juri Fujinaka ,
Rikiya Nino  and
Tetsuo Mohri
Seiji Miura*
Affiliation:
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060–8628, Japan.
Juri Fujinaka
Affiliation:
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060–8628, Japan.
Rikiya Nino
Affiliation:
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060–8628, Japan.
Tetsuo Mohri
Affiliation:
Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060–8628, Japan.
*
1 Corresponding author: [email protected]
Get access

Abstract

A preliminary study on the phase relations in Al-Mo-Ti-X quaternary systems in the vicinity of Ti-trialuminide phases is carried out with various additives X= Mn, Cr, Fe, Ni and Ag. In the Al-Mo-Ti ternary system, a bcc-phase field extends from the Ti-Mo edge to high Al region at high temperatures and it equilibrates with a DO22-Al3Ti phase containing a large amount of Mo. It is found that, by additions of X= Mn, Cr, Fe or Ni, an L12-(Al, X)3 Ti phase appears near the two-phase region composed of the DO22-Al3 Ti and bcc phases in the Al-Mo-Ti ternary system. By heat treatment at 1223 K, the bcc phase of quaternary alloys decomposes into the A15-Mo3Al, DO22, L12 and/or σ phases, and no voids are observed. The mechanical properties of these alloys are also investigated by Vickers hardness.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N5.15.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

2

Graduate Student, Graduate School of Engineering, Hokkaido University.

References

REFERENCES

1. Yamaguchi, M. and Inui, H., “Intermetallic Compounds”, vol.2, pp.147–173, (1995), eds. by Westbrook, J. H. and Fleischer, R. L., John Weily and Sons, Ltd., England.Google Scholar
2. Matsubara, T., Shibutani, T., Uenishi, K. and Kobayashi, K. F. : J. Intermetallics, 8, 815–822 (2000).Google Scholar
3. Varin, R. A. and Zbroniec, L., High-Temperature Ordered Intermetallic Alloys VII, MRS Symp. Proc. vol.460, Koch, C. C., Liu, C. T., Stoloff, N. S. & Wanner, A. eds., MRS, Pittsburgh, (1997), pp.121–126.Google Scholar
4. Park, J. Y., Oh, M. H., Wee, D. M., Miura, S. and Mishima, Y. : Proc. Intnl. Symp. Gamma Titanium Aluminides, Kim, Y-W., Wagner, R. and Yamaguchi, M. eds., TMS, Warrendale, (1995), 377–384.Google Scholar
5. idem: Scripta Mater, 36, 795–800 (1997).Google Scholar
6. Nino, Rikiya, Miura, Seiji and Mohri, Tetsuo : J. Intermetallics, 9, 113–118 (2001).Google Scholar
7. Nino, Rikiya, Fujinaka, Juri, Miura, Seiji and Mohri, Tetsuo: to be submitted to J. Intermetallics.Google Scholar
8. idem : to be submitted to J. Intermetallics.Google Scholar
9. Okamoto, H., “Phase Diagrams for Binary Alloys”, ASM International, Materials Park, Ohio, (2000).Google Scholar