Hostname: page-component-745bb68f8f-mzp66 Total loading time: 0 Render date: 2025-02-10T08:20:18.542Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural Characterization of Al2O3/Gamma Titanium Aluminide Composites

Published online by Cambridge University Press:  15 February 2011

G. Das  and
S. Krishnamurthy
G. Das
Affiliation:
Metcut-Materials Research Group, Wright-Patterson AFB, OH. Now at Pratt & Whitney, P.O. Box 109600, West Palm Beach, Fl 33410-9600
S. Krishnamurthy
Affiliation:
Metcut-Materials Research Group, Wright-Patterson AFB, OH. Now at Universal Energy System, 4401 Dayton-Xenia Road, Dayton, Ohio 45432
Get access

Abstract

Alumina (A12O3) fibers were incorporated into gamma titanium aluminide(TiAl) based powders by hot isostatic pressing (HIP'ing). The microstructure of as-HIP'd and heat treated composite specimens were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). TEM studies reveal the presence of an amorphous reaction zone at the fiber/matrix interface. Numerous dislocations, dipoles and loops as well as twins are observed in A12O3 fibers. In addition, it is determined that the fiber/matrix interface stability is significantly affected by the matrix microstructure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 273: Symposium Q – Intermetallic Matrix Composites II , 1992 , 93
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Das, G. in Advances in Powder Metallurgy, (Metal Powder Industries Federation, Princeton, N.J., 1989), p. 491.Google Scholar
2) Krishnamurthy, S. in Titanium Aluminide Composites, WL-TR-91–4020, Edited by Smith, P.R., Balsone, S.J., and Nicholas, T.D. (Wright Laboratory, WPAFB, OH 45433, 1991), p.135.Google Scholar
3) Reynolds, G.G. and Powell, P.W. in Titanium Aluminide Composites,. WL-TR-91 4020, Edited by Smith, P.R., Balsone, S.J., and Nicholas, T.D. (Wright Laboratory, WPAFB, OH 45433, 1991), p. 217.Google Scholar
4) Das, G., Harper, E., Omler, R. and Lewis, R., Practical Metallography, 26, 443 (1989).CrossRefGoogle Scholar
5) Misra, A.K., Met. Trans. A, 22A, 715 (1991).Google Scholar
6) Stofel, E. and Conrad, Hans, Trans. AIME, 227 [5], 1053 (1963).Google Scholar
7) Pletka, B.J., Mitchell, T.E., and Heuer, A.H., J. Amer. Ceram. Soc. 57[9], 388 (1974).Google Scholar