Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-19T02:05:23.014Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanisms of Formation of Thin Buried Oxide Layers by Ion Implantation

Published online by Cambridge University Press:  25 February 2011

Alice E. White ,
K. T. Short ,
L. N. Pfeiffer  and
K. W. West
Alice E. White
Affiliation:
AT&T Bell LaboratoriesMurray Hill, NJ 07974
K. T. Short
Affiliation:
AT&T Bell LaboratoriesMurray Hill, NJ 07974
L. N. Pfeiffer
Affiliation:
AT&T Bell LaboratoriesMurray Hill, NJ 07974
K. W. West
Affiliation:
AT&T Bell LaboratoriesMurray Hill, NJ 07974
Get access

Abstract

We have studied buried oxide formation as a function of implantation and annealing conditions. The layers appear to form via a nucleation and growth process, so the quality of the oxide and the perfection of the overlying crystalline Si layer depend more strongly on the substrate temperature during implantation than on the annealing temperature. Since it is easier to observe the layer formation process in a thin (<1000Å) layer, we concentrated on sub-stoichiometric doses and chose substrate temperatures below 400°C to stay in a homogeneous nucleation regime. Then we varied the annealing temperature from 1150°C to 1407°C. Modeling the coalescence of the oxide layer as a thermally-activated process yields activation energies of approximately 6 eV, suggesting that crystalline damage removal may be the bottleneck for this substrate temperature regime.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 93: Symposium C – Materials Modification and Growth Using Ion Beams , 1987 , 131
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hemment, P. L. F. in Mat. Res. Soc. Symp. Proc. 53, 207 (1986) and references therein.Google Scholar
[2] Alice White, E., Short, K. T., Batstone, J. L., Jacobson, D. C., Poate, J. M., and West, K. W., Appl. Phys. Lett. 50, 1 (1987).Google Scholar
[3] White, Alice E., Short, K. T., Pfeiffer, L. N., West, K. W., and Batstone, J. L., Proceedings of Fall 1986 Material Research Society Meeting, to be published.Google Scholar
[4[ Celler, G. K., Hemment, P. L. F., West, K. W., and Gibson, J. M., Appl. Phys. Lett. 48, 532 (1986).Google Scholar
[5] Hensel, E., Wollschlager, K., Schulze, D., Kreissig, U., Skorupa, W., and Finster, J., Surface and Interface Analysis 7, 207 (1985).Google Scholar
[6] Chu, Wei-Kan, Mayer, James W. and Nicolet, Marc-A., “Backscattering Spectrometry”, (Academic Press, New York 1978).Google Scholar
[7] Smith, F. W. and Ghidini, G., J. Electrochem. Soc. 129, 1302 (1982).Google Scholar
[8] Olson, G. L., Kokorowski, S. A., Roth, J. A., and Hess, D. L., Mat. Res. Soc. Symp. Proc. 13, 145 (1983).Google Scholar
[9] Gosele, Ulrich and Frank, Werner, Mat. Res. Soc. Symp. Proc. 2, 55 (1981).Google Scholar