Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T15:44:03.302Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Coatings and Interfaces

Published online by Cambridge University Press:  16 February 2011

B. D. Fabes  and
W. C. Oliver
B. D. Fabes
Affiliation:
University of Arizona. Dartment of Materials Science and Engineering. Tucson. AZ 85712
W. C. Oliver
Affiliation:
Oak Ridge National Laboratories. Metals and Ceramics Division. Oak Ridge. TN 37831
Get access

Abstract

Silica Coatings of various thicknesses. hardnesses. and interface integrities were deposited on sapphire substrates using sol-gel techniques. The mechanical properties of the coatings were examined using a mechanical properties microprobe. The observed changes in hardness with indentation depth are explained on the basis of a model of the indentation sequence. in which three separate stages of the indentation process are described. In the first stage. the properties of the coating alone are probed: in the second stage. as the plastic field associated with the indenter extends beyond the coating into the substrate, the properties of the substrate begin to appear: and in the third stage. where the indenter penetrates into the substrate, the composite hardness is dominated by that of the substrate, although the properties of the coating are still apparent.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 188: Symposium K – Thin Films: Stresses and Mechanical Properties II , 1990 , 127
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Oliver, W.C., Hutchings, R., and Pethica, J.B., in Microindentation Techniques in Materials Science and Engineering. ASTM STP 889. P.J. Blau and B.R. Lawn. eds. pp. 90–108Google Scholar
2. Fabes, B.D. and Uhlmann, D.R.. J. Am. Ceram. Soc.. in press.Google Scholar
3. Pethica, J.B. and Oliver, W.C.. Mat. Res. Soc. Symp. Proc.. 130 (1989) 13.Google Scholar
4. Doerner, M.F.. and Nix, W.D.. J. Mater. Res. 1 (1986) p. 601.Google Scholar
5. Fabes, B.D. and Oliver, W.C., J. Non-Cryst. Sol.. in press.Google Scholar
6. Burnett, P.J. and Rickerby, D.S., Thin Solid Films, 148 (1987) 41.Google Scholar
7. Sargent, P.M. in Microindentation Techniques in Materials Science and Engineering. ASTM STP 889, P.J. Blau and B.R. Lawn, eds. pp. 160–174.Google Scholar
8. Lawn, B.R.. Evans, A.G.. and Marshall, D.B.. J. Am. Ceram. Soc.. 63 (1980) 574.Google Scholar
9. Burnett, P.J. and Rickerby, D.S.. Thin Solid Films 148 (1987) 51.Google Scholar
10. Burnett, P.J. and Page, T.F.. J. Mat. Sci.. 19 (1984) 845.Google Scholar