Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-25T15:20:51.868Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties Evolution of Polydimethylsiloxane During Crosslinking Process

Published online by Cambridge University Press:  26 February 2011

Yi Zhao  and
Xin Zhang
Yi Zhao
Affiliation:
[email protected], The Ohio State University, Department of Biomedical Engineering, 294 Bevis Hall, 1080 Carmack Road, Columbus, OH, 43210, United States
Xin Zhang
Affiliation:
[email protected], Boston University, Department of Manufacturing Engineering, 15 Saint Mary's Street, Brookline, MA, 02446, United States
Get access

Abstract

This paper reports mechanical properties evolution of polydimethylsiloxane (PDMS) during the crosslinking process. In this work, PDMS crosslinking was induced by mixing base prepolymer and curing agent at certain ratios. The liquid prepolymer was spun coated on a silicon wafer, and the curvature change of the wafer was measured continuously using a curvature measurement system. The relationship between the curvature change and typical mechanical properties was investigated using a bilayer model; and the evolution of the properties was derived, as a function of operational parameters. This work is expected to help better understanding of the crosslinking process and provide practical strategies for controlling the mechanical behavior of the resulting polymer structures, especially those for mechanical sensing applications.

Keywords

polymerelastic propertiesmicroelectro-mechanical (MEMS)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 975: Symposium DD – Mechanics of Biological and Bio-Inspired Materials , 2006 , 0975-DD06-07
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Xia, Y., McClelland, J.J., Gupta, R., Qin, D., Zhan, X.M., Sohn, L.L., Celotta, R.J., Whitesides, G. M., Replica molding using polymeric materials: a practical step toward nanomanufacturing. Advanced Materials (Weinheim), 9 (2), 147–149, 1997.Google Scholar
[2] Xia, Y., Kim, E., and Whitesides, G. M., Micromolding of polymers in. capillaries: Applications in microfabrication. Journal of Chemical Materials, 8, 1558–1567, 1996.Google Scholar
[3] Zhao, Y., and Zhang, X., An approach for creating polymeric microstructures with various aspect ratios for cellular analysis applications, Sensors & Actuators A: Physics, 127 (2), 216–220, 2006.Google Scholar
[4] Chu, W. H. et al. Analysis of tip deflection and force of a bimetallic cantilever microactuator. J. Micromechanics and Microengineering, 3, 4–7, 1993.Google Scholar