Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T09:55:17.688Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties and Deformation Mechanisms of an A12O3 Fiber-Reinforced Nial Matrix Composite

Published online by Cambridge University Press:  15 February 2011

S. M. Jeng ,
J.-M. Yang  and
R. A. Amato
S. M. Jeng
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90024-1595
J.-M. Yang
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90024-1595
R. A. Amato
Affiliation:
GE Aircraft Engines, Cincinnati, OH 45215
Get access

Abstract

The mechanical behavior of a continuous Al2O3 fiber-reinforced NiAl matrix composite was investigated. The interfacial mechanical properties were measured at room temperature using a fiber pushout test. Tensile test was conducted at room and elevated temperatures. Four-point bending creep test was also conducted at 700 °C. The key microstructural parameters controlling the mechanical behavior and fracture processes were identified. The effect of fiber surface coating on the interfacial properties and mechanical behavior of the composite was also studied.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 273: Symposium Q – Intermetallic Matrix Composites II , 1992 , 217
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Field, R. D., Lahrman, D. F. and Darolia, R., Acta Met., to be published.Google Scholar
2. Schulson, E. M. and Barker, D. R., Scripta Met., 17, pp. 519–304, 1983.CrossRefGoogle Scholar
3. George, E. P. and Liu, C. T., J. Mater. Res., 5, pp. 754–762, 1990.Google Scholar
4. Jha, S. C., Ray, R. and Gaydosh, D. J., Script Met., 23, pp. 805–810, 1989.Google Scholar
5. Yang, J.-M. and Jeng, S. M., J. Mat. Res., 6[3], pp.505, 1991.Google Scholar
6. Yang, C. J., Jeng, S. M. and Yang, J.-M., Scripta Met. 24, 3, p.468, 1990.Google Scholar
7. Darolia, R., J. of Metals, pp. 44–49, March 1991.Google Scholar
8. Yang, J.-M., Thayer, R. B., Chen, S. T. and Lin, W., in Proc. of ICCM VIII, p. 23–Cl, 1991.Google Scholar