Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T08:52:22.341Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical and Thermoviscoelastic Behavior of Clay/Epoxy Nanocomposites

Published online by Cambridge University Press:  11 February 2011

Jandro L. Abot ,
Asma Yasmin  and
Isaac M. Daniel
Jandro L. Abot
Affiliation:
Robert McCormick School of Engineering and Applied Science, Northwestern University, Evanston, IL 60208, U.S.A.
Asma Yasmin
Affiliation:
Robert McCormick School of Engineering and Applied Science, Northwestern University, Evanston, IL 60208, U.S.A.
Isaac M. Daniel
Affiliation:
Robert McCormick School of Engineering and Applied Science, Northwestern University, Evanston, IL 60208, U.S.A.
Get access

Abstract

The study of organic-inorganic nanocomposites has become relevant in recent years since these materials exhibit synergistic properties derived from the two components. Thermosetting polymers like epoxies that have high mechanical properties provide a baseline for further improvement with the addition of nanoclay particles. These nanocomposites can be used as the matrix of a fiber reinforced composite and lead to higher matrix dominated mechanical properties including elastic modulus, strength and fracture toughness. This study concentrates on the mechanical and thermoviscoelastic properties in the glassy regime of nanocomposites prepared by direct mixing. The elastic modulus of the nanocomposites was found to improve with respect to the pure epoxy modulus at the expense of both tensile strength and ductility regardless of clay content. The glass transition temperature was also found to decrease as well. The morphology of the nanocomposites was studied and correlated with the aforementioned properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 740: Symposium I – Nanomaterials for Structural Applications , 2002 , I6.5
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pinnavaia, T. J. and Beall, G. W., Polymer-Clay Nanocomposites, (Wiley, Chichester, 2000) pp. 127–149.Google Scholar
2. Vaia, R. D. and Liu, W.. J. Polym. Sci.: Part B: Polym. Phy. 40, 1590 (2002).Google Scholar
3. Lü, J., Yucai, K., Zongneng, Q. and Xiao-Su, Y.. J Polym. Sci., Part B: Polym. Phy. 39, 115 (2001).Google Scholar
4. Lan, T., Pinnavaia, T. J.. Chem. Mater. 6, 2216 (1994).Google Scholar
5. Giannelis, E. P. and Messersmith, P. B., U.S. Patent No. 5 554 670 (10 September 1996).Google Scholar
6. Zilg, C., Mülhaupt, R. and Finter, J.. Macromol. Chem. Phys. 200, 661 (1999).Google Scholar
7. Zilg, C., Thomann, R., Mülhaupt, R. and Finter, J.. Macromol. Mater. Eng. 280/281, 41 (2000).Google Scholar
8. Messersmith, P. and Giannelis, E. P.. Chem. Mater. 6, 1719 (1994).Google Scholar
9. Manias, E., Chen, H., Krishnamoorti, R., Genzer, J., Kramer, E. J. and Giannelis, E. P.. Macromol. 33, 7955 (2000).Google Scholar
10. Kornmann, X., Lindberg, H. and Berglund, L. A.. Polym. 42, 1303 (2001).Google Scholar
11. Yasmin, A., Abot, J. L. and Daniel, I. M.. “2002 MRS Conference” (2002).Google Scholar