Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-19T02:07:27.981Z Has data issue: false hasContentIssue false
  • English
  • Français

Measurements of Size Scale Effects in Layered Structures

Published online by Cambridge University Press:  10 February 2011

Ashraf Bastawros  and
Antonia Antoniou
Ashraf Bastawros
Affiliation:
Dept. of Aerospace Engineering and Mechanics, Iowa State University, Ames, IA 50011
Antonia Antoniou
Affiliation:
Dept. of Aerospace Engineering and Mechanics, Iowa State University, Ames, IA 50011
Get access

Abstract

A novel experimental configuration is devised to measure the evolution of the deformation field and the corresponding hardening evolution within soft metallic films constrained by hard layers. The experimental configuration provides pure shear state within the constrained film. The material system utilized comprised ductile layer of tin based solder, encapsulated within relatively hard copper shoulders. Different tin-lead compositions are tested with grain size approaching the film thickness. The in-plane strain distribution within the film layer is measured by a microscopic digital image correlation system. The hardening evolution within such highly gradient deformation field is monitored qualitatively through a 2D surface scan with a nanoindentor. The measurements showed a highly inhomogeneous deformation field within the film with discreet shear bands of concentrated strain. The localized shear bands showed long-range correlations of the order of 3-4 the grain size. A size-dependent macroscopic response on the layer thickness is observed. However, the corresponding film thickness is approximately 100-1000 times larger than those predicted by non-local continuum theories and discrete dislocation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 778: Symposium U – Mechanical Properties Derived from Nanostructuring Materials , 2003 , U1.2
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Madou, M., Fundamental of Microfabrication (CRC Press, 1999)Google Scholar
2. Frear, D., Morgan, H., Burchett, S. and Lau, J., The Mechanics of Solder Alloy Interconnects. (Chapman and Hall, 1994).Google Scholar
3. Dieter, G.E., 1981, Mechanical Metallurgy, McGraw-Hill, New York Google Scholar
4. Ranieri, J.P., Lauten, F.S., and Avery, D.H., J. Elec. Mat. 24, 1419 (1995).Google Scholar
5. Green, A.P., J. Mech. Phys. Solids 2, 197 (1954).Google Scholar
6. Needleman, A., Acta Metall, 48, 105 (2000).Google Scholar
7. Ashby, M., Phil. Mag., 21 (1970).Google Scholar
8. Tvergaard, V. and Hutchinson, J., J. Mech. Phys. Solids, 40, 1377 (1992).Google Scholar
9.Instron, 1997, “Surface Displacement Analysis User Manual”.Google Scholar
10. Brigham, E. O., The Fast Fourier Transform (Prentice-Hall, Inc., New Jersey, 1974).Google Scholar
11. Chen, D.J., Chiang, F.P., Tan, Y.S. and Don, H.S., Applied Optics, 32, 1839 (1993).Google Scholar
12. Bastawros, A.-F. and McManuis, R., Exp. Tech., 22, 35 (1998).Google Scholar
13. Bastawros, A.-F., Bart-Smith, H. and Evans, A. G., J. Mech. Phys. Solids 48, 301 (2000).Google Scholar
14. Tabor, D., Hardness of Metals (Oxford University press, Oxford, 1951).Google Scholar
15. Bastawros, A.-F. and Kim, K.-S., in Fracture and Ductile vs. Brittle Behavior, (Mater. Res. Soc. Symp. Proc. 539, Pittsburgh, PA, 1998), p. 251.Google Scholar
16. Bastawros, A.-F. and Kim, K.-S., J. Mech. Phys. Solids, 48, 67 (2000).Google Scholar
17. Callister, W., Material Science and Engineering, An Introduction (John Wiley & Sons, New York, 1999).Google Scholar
18. Meissner, H. P. and Merrill, E. W., ASTM Bull. 151, 80 (1948), in: Adhesion and Adhesives Science and Technology, edited by A.J. Kinloch (Chapman and Hill, London, 1987), p. 211.Google Scholar