Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-05T15:48:14.631Z Has data issue: false hasContentIssue false
  • English
  • Français

Latchup Free Lateral Cmos on Laser Recrystallized Silicon

Published online by Cambridge University Press:  28 February 2011

S. Sritharan ,
R. Solanki ,
G. J. Collins ,
J. Fukumoto ,
N. Szluk  and
D. Ellsworth
S. Sritharan
Affiliation:
Colorado State University, Fort Collins, Colorado.
R. Solanki
Affiliation:
Colorado State University, Fort Collins, Colorado.
G. J. Collins
Affiliation:
Colorado State University, Fort Collins, Colorado.
J. Fukumoto
Affiliation:
NCR Microelectronics, Fort Collins, Colorado.
N. Szluk
Affiliation:
Colorado State University, Fort Collins, Colorado.
D. Ellsworth
Affiliation:
NCR Microelectronics, Fort Collins, Colorado.
Get access

Abstract

Latchup free CMOS devices have been fabricated by forming PMOS transistors in a 0.5μm thick laser recrystallized silicon layer. This recrystallized layer is isolated fram the bulk wafer by a lμm thick oxide layer. The NMOS transistors were fabricated both in the bulk wafer in the region which was used as the recrystallization seeds, as well as in the recrystallized silicon layer itself. Ring oscillators fabricated with 3μm channel length using a bi-layer lateral CMOS structure show a naninal delay of 1.7ns/stage. The MOS devices fabricated in the recrystallized silicon show low subthreshold leakage current, and surface electron and hole mobilities of 580cm2/V.s and 210cm2/V.s respectively.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 53 , 1985 , 407
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Referencs

[1] Coubs, S. R., IErt Tech. Dig., 1980, pp. 346–350.Google Scholar
[2] Estreich, D. B. and Ochoa, A., IEDM Tech. Dig., 1978, pp. 230–234.Google Scholar
[3] Rung, R. D., Momose, H. and Nagakubo, Y., IEDM Tech. Dig., 1982, pp. 237–240Google Scholar
[4] Yamaguchi, T. et al., IEDM Tech. Dig., 1983, pp. 522–525Google Scholar
[5] Koeneke, C. J., Sze, S. M., Levin, R. M. and Kinsbron, E., IEDM Tech. Dig., 1981, pp. 367–370.Google Scholar
[6] Sugino, M., Akers, L. A., Rebeschini, M. E., Trans. on Elect. Dev., ED–30, 1983, pp. 110–130.Google Scholar
17] Koeneke, C. J. and Lynch, W. T., IEDM Tech. Dig., 1982, pp. 466–469.Google Scholar
[8] Swirhun, S. et al., IEDM Tech. Dig., 1984, pp. 402–405.Google Scholar