Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-09T09:44:18.478Z Has data issue: false hasContentIssue false

Laser Physical and Laser Chemical Vapor Deposition of TiN and TiNxOy Films

Published online by Cambridge University Press:  25 February 2011

J. Narayan
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, N.C. 27695-7916
N. Biunno
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, N.C. 27695-7916
A.R. Srivatsa
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, N.C. 27695-7916
R. Singh
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, N.C. 27695-7916
B. Chen
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, N.C. 27695-7916
Get access

Abstract

We have investigated the formation of polycrystalline TiN and amorphous TiNxOy films using laser physical (LPVD) and laser chemical (LCVD) vapor deposition techniques. The LPVD method involved the ablation of a TiN hot pressed pellet and Ti in the presence of nitrogen plasma using nanosecond XeCl excimer laser pulses (wavelength 308nm, pulse duration 45×10−9 seconds, and energy density ∼4-5 Jcm−2). The films were polycrystalline (average grain size ∼100Å) with face-centered-cubic structure and lattice constant of 4.25Å. The average grain size remained constant as the substrate temperature ranged from 25 to 550°C. In the LCVD method, a pulsed CO2 laser beam was used to crack TiCl4 and NH3 and form TiN films. Amorphous TiNxOy films were formed under poor vacuum conditions in the LPVD techniques. These amorphous TiNxOy films often exhibited explosive recrystallization with characteristic star patterns. Resistivity and microhardness measurements were made on these films and these results have been correlated with microstructure and chemical composition.

Type
Research Article
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sundgren, J.E., Johansson, B.O. and Karlsson, S.E., Thin Solid Films, 105, 353 (1983).Google Scholar
2. Wittmer, M. and Melchior, H., Thin Solid Films, 93, 397 (1982).CrossRefGoogle Scholar
3. Zega, B., Kornmann, M. and Amiquet, J., Thin Solid Films, 54, 577 (1977).Google Scholar
4. Vulkonen, E., Karlsson, T., Karlsson, B. and Johannson, B.O., Proceedings of SPIE 1983 International Technical Conference, 401, 41 (1983).Google Scholar
5. Dawson, P.T. and Tzatzov, K.K., Surface Science 149, 105 (1985).Google Scholar
6. Pantel, R., Levy, D. and Nicolas, D., J. Vac. Sci. Technol. A 6, 2953 (1988).Google Scholar