Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-25T15:33:14.462Z Has data issue: false hasContentIssue false

Large-area patterned magnetic nanostructures by self-assembling of polystyrene nanospheres

Published online by Cambridge University Press:  12 April 2012

Paola Tiberto
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Luca Boarino
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Federica Celegato
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Gabriele Barrera
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Marco Coisson
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Natascia De Leo
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Franco Vinai
Affiliation:
Electromagnetics Division. INRIM, 10135 Torino
Get access

Abstract

In this work, dot and anti-dot structures in Co, Ni, Ni80Fe20, Fe50Pd50, Fe73.5Cu1Nb3Si13.5B9 and Fe78B13Si9 thin films have been produced by means of nanosphere lithography. Two multi-step processes have been followed and will be here described. The first one directly exploits polystyrene nanosheres (PN) as a mask to fabricate arrays of magnetic nanoholes and dots. In the second case, the nanospheres are used to design a polymeric mask of a photoresist subsequently used to pattern a magnetic nanostructure on a film. Advantages and disadvantages of the two lithographical techniques will be here highlighted. In both processes, the dimension and mutual distance of the patterns are dependent on the starting PN diameter (in the interval 500-800 nm). Samples microstructure has been studied by means of SEM and AFM microscopy. Room-temperature hysteresis loops have been measured by an AGFM (Alternating Gradient Field Magnetometer). MFM microscopy has been exploited to study the magnetic domain pattern. All produced systems have been observed to display tunable microstructure and, consequently, various magnetic properties for application.

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Magnetic Nanostructures , edited by Nalwa, H.S. (American Scientific, 2002)Google Scholar
2. Ross, C. A., Annu. Rev. Mater. Res. 31 (2001) 203 Google Scholar
3. Hulteen, J.C. and Van Duyne, R. P. J. Vac. Sci. Technol. A 13 (1995)1553 Google Scholar
4. Tiberto, P., Boarino, L., Celegato, F., Coïsson, M., De Leo, N., and Vinai, F., J. Appl. Phys. 107 (2010) 09B52021.Google Scholar
5. Coïsson, M., Boarino, L., Celegato, F., De Leo, N., Tiberto, P., Vinai, F., J. Nanopart. Res.. (2011) in press, doi:10.1007/s11051-011-0309-z.Google Scholar
6. Wang, C. C., Adeyeye, A. O., Singh, N., Nanotech. 17 (2006) 1629 Google Scholar
7. Tiberto, P.Boarino, L.Celegato, F., Coisson, M.Enrico, E.de Leo, N., Vinai, F.Allia, P. J. Nanopart. Res. 13 (2011) 4211 Google Scholar
8. Wu, W., Katsnelson, A., Memis, O.G., and Mohseni, H., Nanotech. 18 (2007) 4853021 Google Scholar
9. Pirota, K.R., Prieto, P., Neto, A.M.J., Sanz, J.M., Knobel, M., Vazquez, M. J. Magn. Magn. Mater. 320 (2008) e235.Google Scholar