Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-25T17:31:06.677Z Has data issue: false hasContentIssue false
  • English
  • Français

Kinetic Study Of High Tc Bi-Pb-Sr-Ca-Cu-O System

Published online by Cambridge University Press:  28 February 2011

W.-M. Hurng ,
Y. T. Huang ,
C. Y. Shei ,
C. Chiang ,
H. S. Koo ,
S. F. Wu  and
P. T. Wu
W.-M. Hurng
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
Y. T. Huang
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
C. Y. Shei
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
C. Chiang
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
H. S. Koo
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
S. F. Wu
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
P. T. Wu
Affiliation:
Materials Research Laboratories, Industrial Technology Research Institute, Chutung, Hsinchu, 31015, Taiwan, R. O. C.
Get access

Abstract

By studying the Bi-Pb-Sr-Ca-Cu-O system, we have found that the sintering time to form high Tc Bi-Pb-Sr-Ca-Cu-O systems was quite different as the compositions of the starting materials varied. Especially, the ratio of Sr/Ca played an important role in determining the sintering time.

DTA study already showed that partial melting occurred during the reaction. The temperature of the partial melting was also related to the ratio of Sr/Ca. Our results supported the existence of a reactive liquid phase in sintering process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 180: Symposium A – Better Ceramics Through Chemistry IV , 1990 , 925
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Michel, C., Hervieu, M., Borel, M. M., Grandin, A., Deslanders, F., Provost, J. and Reveau, B., Z. Phys. B 68, 421 (1987).Google Scholar
2. Maeda, H., Tanaka, Y., Fukutomi, M. and Asano, T., Jpn. J. Appl. Phys. 27, L209 (1988).Google Scholar
3. Endo, U., Koyama, S. and Kawai, T., Jpn. J. Appl. Phys. 28, L190 (1989).Google Scholar
4. Endo, U., Koyama, S. and Kawai, T., Jpn. J. Appl. Phys. 27, L1476 (1988).Google Scholar
5. Takano, M., Takada, J., Oda, K., Kitaguchi, H., Miura, Y., Ikeda, Y., Tomii, Y. and Mazaki, H., Jpn. J. Appl. Phys. 27, L1041 (1988).Google Scholar
6. Murayama, N., Sudo, E., Awano, M., Kani, K. and Torii, Y. Jpn. J. Appl. Phys. 27, L1629 (1988).Google Scholar
7. Huang, Y. T., Wang, W. N., Liu, R. G., Lu, S. W. and Wu, P. T. Appl. Phys. Lett. 56, 779 (1990).Google Scholar
8. Huang, Y. T., Shei, C. Y., Wang, W. N., Chiang, C. K. and Lee, W. H., submitted to Physica C.Google Scholar
9. Uzumaki, T., Yamanaka, K., Kamehara, N. and Niwa, K., Jpn. J. Appl. Phys. 28, L75 (1989).Google Scholar
10. Huang, Y. T., Wang, W. N., Wu, S. F., Shei, C. Y., Hurng, W.-M., Lee, W. H. and Wu, P. T. submitted to J. Am. Cera.Soc.Google Scholar