Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T07:52:24.749Z Has data issue: false hasContentIssue false
  • English
  • Français

Iridium Silicide Formation by Rapid Thermal Annealing

Published online by Cambridge University Press:  15 February 2011

T. Rodriguez ,
H. Wolters ,
A. Almendra ,
J. Sanz-Maudes ,
M.F. Da Silva  and
J.C. Soares
H. Wolters
Affiliation:
ETSI Telecomunicacion – 28040 Madrid (Spain) CFN – Lisboa (Portugal) LNETI – Sacavem (Portugal)
M.F. Da Silva
Affiliation:
LNETI – Sacavem (Portugal)
J.C. Soares
Affiliation:
ETSI Telecomunicacion – 28040 Madrid (Spain) CFN – Lisboa (Portugal)
Get access

Abstract

Iridium silicides formation by rapid thermal annealing (RTA) under vacuum at several temperatures in the range of 350 to 650°C has been investigated. The substrates and the silicide films were analyzed by Rutherford backscattering spectrometry (RBS) and Auger electron spectroscopy (AES). At 350°C, no distinguishable phase was detected for 240 seconds of annealing time. At 400°C, for processing time up to 45 seconds only Ir1Si1 was formed, for longer processing time Ir1Si1.75 was formed too. At higher temperatures even for very short processing time, Ir1Si1.75 was formed. Ir, Ir1Si1 and Ir1Si1.75 were present simultaneously if the iridium film was thick enough and the processing time was long enough too. For thin iridium layers, the Ir1Si1 formed was totally converted to Ir1Si1.75, if the annealing time was long enough. Formation rates were observed to be three to five orders of magnitude faster than the reported for furnace annealing.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 299: Symposium C2 – Infrared Detectors--Materials, Processing, and Devices , 1994 , 313
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tsaur, B., Weeks, M.M., Trubiano, R. and Pellegrini, P.W., IEEE Elect. Dev. Lett. 9, 650 (1988)Google Scholar
2. Tsaur, B., Chen, C. K. and Nechay, B.A., IEEE Elect. Dev. Lett. 11, 415 (1990)Google Scholar
3. Petersson, S., Baglin, J., Hammer, W., d'Heurle, F., Kuan, T.S., Ohdomari, I., Pires, J. de Sousa and Tove, P., J. Appl. Phys. 50, 3357 (1979)Google Scholar
4. Tsaur, B.,Weeks, M.M. and Pellegrini, P.W., IEEE Elect. Dev. Lett. 9, 100 (1988)Google Scholar
5. Ponpon, J.P. and Saulnier, A., Semicond. Sci. Tech. 4, 526 (1989)Google Scholar
6. Dimitriadis, C.A., Polychroniadis, E.K., Evangelou, E.K. and Giakoumakis, G.E., J. Appl. Phys. 70, 3109 (1991)Google Scholar
7. Fernandez, M., Rodriguez, T., Almendra, A., Jimenez, J. and Wolters, H., presented at the 1993 MRS Spring Meeting, San Francisco, CA, 1993 (unpublished)Google Scholar
8. Wittmer, M., Phys. Rev. B, 42, 5249 (1990)Google Scholar
9. Pellegrini, P. (private communication)Google Scholar
10. Singh, R., Sinha, S., Thakur, R.P.S. and HSu, K.J., SPIE Proc. 1393, 78 (1990)Google Scholar