Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-23T09:11:12.648Z Has data issue: false hasContentIssue false
  • English
  • Français

Ion Beam Etching of CVD Diamond Enhanced by Prior Au and O Implantation.

Published online by Cambridge University Press:  11 February 2011

Patrick W. Leech ,
Geoffrey K. Reeves ,
Anthony S. Holland  and
Mark C. Ridgway
Patrick W. Leech
Affiliation:
CSIRO Manufacture and Infrastructure Technology, Melbourne, AUSTRALIA.
Geoffrey K. Reeves
Affiliation:
CSIRO Manufacture and Infrastructure Technology, Melbourne, AUSTRALIA.
Anthony S. Holland
Affiliation:
RMIT University, School of Electrical and Computer Engineering, Melbourne, AUSTRALIA.
Mark C. Ridgway
Affiliation:
Dept. of Electronic Materials Eng., Australian National University, Canberra, AUSTRALIA.
Get access

Abstract

Diamond films were implanted with Au or O ions at multiple energies in order to produce a uniform region of C vacancies. Analysis of the implanted films by Raman spectroscopy has shown that the proportion of non-diamond or amorphous carbon increased with dose (5 × 1013 − 5 × 1015 ions/cm2). For implantation with Au ions, a complete amorphisation near to the surface was evident at a dose of 5 × 1015 ions/cm2. We have examined the ion beam etch (IBE) rate of the films as a function of the implant species and dose. The etching experiments were performed using either Ar or Ar/O2 gases at a bias energy of 500 -1,000 eV. In Ar gas, the process of sputter etching has produced a similar increase in etch rate with dose for both the Au and O implants. In Ar/ O2 gases, the process of ion-enhanced chemical etching produced greater etch rates than obtained in Ar gas with higher rates for the Au than the O implants.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 750: Symposium Y – Surface Engineering 2002–Synthesis, Characterization and Applications , 2002 , Y5.36
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Malshe, A.P., Park, B.S., Brown, W.D. and Naseem, H.A., Diamond Rel. Mater. 8, 1198 (1999).Google Scholar
2. Grogan, D.F., Zhao, T., Bovard, B.G. and Macleod, H.A., Applied Optics 31(10), 1483 (1992).Google Scholar
3. Leech, P.W., Reeves, G.K., Holland, A.S., Ridgway, M.C. and Shanks, F., Diamond and Relat. Mater. 11, 837 (2002).Google Scholar
4. Prins, J.F., Radiation Effects Lett. 76, 79 (1983).Google Scholar
5. Fox, B.A. in Thin Film Technology Handbook, Ed. Elshabini-Riad, A. and Barlow, F.D. III, McGraw-Hill, 7 (1997).Google Scholar
6. Sun, Z., Shi, J.R., Tay, B.K. and Lau, S.P., Diamond Rel. Mater. 9, 1979 (2000).Google Scholar
7. Hayward, I.P., Baldwin, K.J., Hunter, D.M., Batchelder, D. N. and Pitt, G.D., Diamond and Relat. Mater. 4, 617 (1995).Google Scholar
8. Sato, S., and Iwaki, M., Nuclear Instruments and Methods in Physics Research B32, 145 (1988).Google Scholar
9. Prawer, S., Hoffman, A. and Kalish, R., Appl. Phys. Lett. 57 (21), 2187 (1990).Google Scholar
10. Jiang, N., Deguchi, M., Wang, C.L., Won, J.H., Jeon, H.M., Mori, Y., Hatta, A., Kitabatake, M., Ito, T., Hirao, T., Sasaki, T. and Hiraki, A., Appl. Surf. Sci. 113/114, 254 (1997).Google Scholar
11. Uzan-Saguy, C., Cytermann, C., Brener, R., Richter, V., Shaanan, M. and Kalish, R., Appl. Phys. Lett. 67 (9), 1194 (1995).Google Scholar
12. Steinbruchel, C., Appl. Phys. Lett. 55(19), 1960 (1989).Google Scholar
13. Leech, P.W., Reeves, G.K., Holland, A.S. and Shanks, F., Diamond and Relat. Mater. 11, 833 (2002).Google Scholar