Hostname: page-component-745bb68f8f-hvd4g Total loading time: 0 Render date: 2025-02-11T06:46:31.809Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Relationships in Microelectronic Devices

Published online by Cambridge University Press:  01 February 2011

Michael Lane  and
Robert Rosenberg
Michael Lane
Affiliation:
IBM TJ Watson Research Center, Yorktown Heights, NY 10598
Robert Rosenberg
Affiliation:
IBM TJ Watson Research Center, Yorktown Heights, NY 10598
Get access

Abstract

The continued shrink of interconnect structures is requiring new materials to be introduced into back-end of the line (BEOL) devices at an increasing rate. These new materials must provide a performance benefit from the previous generation with the recent focus on reducing the effective dielectric constant of the integrated structures. This reduction may occur not only by changing the intralevel dielectric but also by changing the capping layer/diffusion barrier on the chemicalmechanically polished (CMP'd) Cu surface. However, changing this material may alter the reliability of the device structure due to a change in the Cu/cap interface bonding. Another consequence of the decrease in minimum feature size in interconnects is that commonly practiced techniques, such as sputtered liner and Cu seed, may not be extendable to future generations. Accordingly, the focus of this paper is on identifying basic relationships between interfacial chemistry and interfacial adhesion and illustrating how those relationships can be used to address some of the issues that may pose problems in future technologies.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 766: Symposium E – Materials, Technology and Reliability for Advanced Interconnects and Low-k Dielectrics - 2003 , 2003 , E9.1
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. KL, Mittal, ASTM Spec. Tech. Publ., 1978, 640.Google Scholar
2. Ruhle M, Evans AG. 1989. Mater. Sci. and Eng., A107: 187.Google Scholar
3. AA, Griffith. 1920. Phhil. Trans. R. Soc. London, A221: 163.Google Scholar
4. RM, Cannon, RM, Fisher, and AG, Evans: MRS Proc., 1986, 54: 799.Google Scholar
5. Cannon, RM. Adv. In Ceram., 1984, 10, 818.Google Scholar
6. CF, Shih, Mat. Sci. Eng, 1991, A143: 77.Google Scholar
7. Ozdil, F and LA, Carlsson, Eng. Fract. Mech., 1992, 41:645.Google Scholar
8. Tvergaard, V and JW, Hutchinson, Phil Mag A, 1994, 70: 641.Google Scholar
9. AG, Evans and JW, Hutchinson, Acta Metall, 1989, 37: 909.Google Scholar
10. ML, Jokl, Vitek, V, CJ, McMahon. 1980. Acta Metall. 38:1479.Google Scholar
11. AG, Evans, Ruhle, M, BJ, Dalgleish and PG, Charalambides. 1990. Metall. Trans. A 21A:2419.Google Scholar
12. RH, Dauskardt, MW, Lane, Ma, Q and Krishna, N, Eng. Fract. Mech., 1998, 61: 141.Google Scholar
13. MW, Lane, submitted Applied Physics Letters 2003.Google Scholar
14. RF, Cook, EG, Liniger. 1993. J. Am. Ceram. Soc., 76: 1096.Google Scholar
15. Bhatnagar, A, MJ, Hoffman and RH, Dauskardt. 2000, J. Am. Ceram. Soc. 83, 585.Google Scholar
16. Hu, C.K, Rosenberg, R, and KL, Lee, Appl. Phys. Lett., 1999, 74, 2945.Google Scholar
17. MW, Lane, EG, Liniger and JR, Lloyd, Appl. Phys. Lett., 2003, 93, 1417.Google Scholar
18. Zener, C., in Shockley, W. (ed.), p. 289, “Imperfections in Nearly Perfect Crystals,” J. Wiley, New York 1952.Google Scholar
19. Hertzberg, R. W., p. 239, “Deformation and Fracture Mechanics of Engineering Materials,” J. Wiley, New York 1989.Google Scholar
20. MW, Lane, RH, Dauskardt, Vainchtein, A and Gao, H, 2000, J Mater. Res., 15, 2758.Google Scholar
21. Handbook of Grain and Interphase Boundary Diffusion Data, Kaur, I. and Gust, W., Ziegler Press, Stuttgart (1989)Google Scholar
22. Merikoski, J, Vattulainen, I, Heinonen, J and Ali-Nissila, T, 1997, Surface Science, 387, 167.Google Scholar
23. Rosenberg, R, PE, Batson, Bruley, J, Splinter, S and DA, Muller, 1998, AIP Conf. Proc., 418, 127.Google Scholar
24. MW, Lane, CE, Murray, FR, McFeely, PM, Vereecken and Rosenberg, R, submitted Applied Physics Letters, 2003.Google Scholar
25. Lingk, C and ME, Gross, J. Appl. Phys., 1998, 84, 5547.Google Scholar