Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T09:00:24.763Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Reactions in Thin Film and Bulk Iron/Silicon Couples

Published online by Cambridge University Press:  10 February 2011

Yuhong Zhang  and
Douglas G. Ivey
Yuhong Zhang
Affiliation:
University of Alberta, Dept. of Chemical and Materials Engineering, Edmonton, Alberta, CANADA T6G 2G6
Douglas G. Ivey
Affiliation:
University of Alberta, Dept. of Chemical and Materials Engineering, Edmonton, Alberta, CANADA T6G 2G6
Get access

Abstract

Initial phase formation in thin film and bulk Fe/Si couples has been investigated using transmission and scanning electron microscopy (TEM and SEM). For the thin film couples, ≈165 nm of Fe was deposited by electron beam evaporation onto <111> oriented Si substrates. SiO2 capping layers (≈100nm thick) were used to protect the Fe from oxidation during subsequent annealing. Bulk diffusion couples were fabricated by clamping together polycrystalline Fe pieces and <111> oriented single crystal Si pieces and sealed in evacuated (≈10-4 torr) quartz capsules. Annealing of thin film couples was done at temperatures ranging from 300°C to 500°C for up to several hours. Bulk couples were annealed at 700°C for up to ≈1000hrs.

Interfacial reactions were detected in as deposited thin film couples. A layer =5nm thick was identified, through electron diffraction, as poorly crystalline off-stoichiometric Fe3Si. Iron was the major diffuser during the formation of Fe3Si. During annnealing off-stoichiometric Fe3Si transformed to stoichiometric Fe3Si. FeSi was the next phase to form - initially detected after annealing at 300°C for 3 hrs. Similar results were obtained for bulk couples. The first phase to form was ordered stoichiometric Fe3Si (initially detected after 7 hrs), followed by FeSi (≈23 hrs) and then FeSi2 (>200 hrs). The formation behavior of these phase is discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 472: Symposium I – Polycrystalline Thin Films - Structure, Texture, Properties..III , 1997 , 161
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Murarka, S.P., Suicides for VLSI Application, Academic Press, New York, 1983.Google Scholar
2. Bost, M.C. and Mahan, J.E., J. Appl. Phys., 58, p. 2034 (1985).Google Scholar
3. Lefki, K., Muret, P., Cherief, N. and Cinti, C., J. Appl. Phys., 60, p. 352 (1991).Google Scholar
4. Rizzi, A., Morits, H. and Luth, H., J. Vac. Sci Technol. A, 9, p. 912 (1991).Google Scholar
5. Kubaschewski, O., Iron-Binary Diagrams. Springer-Verlag, New York, 1982, p. 1362.Google Scholar
6. Kudrnosky, J., Christensen, N.E. and Andersen, O.K., Phys. Rev. B, 43, p. 5924 (1991).Google Scholar
7. Baldwin, N.R. and Ivey, D.G., J. Phase Equil., 16, p. 300 (1995).Google Scholar
8. Zhang, Y. and Ivey, D.G., J. Mater. Sci., submitted, December, 1996.Google Scholar
9. Bene, R.W., J. Appl. Phys., 61 p. 1826 (1987).Google Scholar
10. Gosele, U. and Tu, K.N., J. Appl. Phys., 53, p. 3252 (1982).Google Scholar