Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-24T10:17:47.992Z Has data issue: false hasContentIssue false
  • English
  • Français

Interactions of Hydrating Tricalcium and Dicalcium Silicate using Time-Resolved Quasielastic Neutron Scattering

Published online by Cambridge University Press:  01 February 2011

Vanessa K. Peterson ,
Dan A. Neumann  and
Richard A. Livingston
Vanessa K. Peterson
Affiliation:
Department of Materials Science and Engineering, University of Maryland College Park, MD 20742, U.S.A. Center for Neutron Research, National Institute of Standards and Technology Gaithersburg, MD 20899–8562, U.S.A.
Dan A. Neumann
Affiliation:
Center for Neutron Research, National Institute of Standards and Technology Gaithersburg, MD 20899–8562, U.S.A.
Richard A. Livingston
Affiliation:
Federal Highways Administration McLean, VA 22101, U.S.A.
Get access

Abstract

Hydrating tricalcium and dicalcium silicate mixtures were studied using time-resolved quasielastic neutron scattering. Application of a hydration model allowed the extraction of several parameters describing the hydration mechanics. The hydration rate during the nucleation and growth period, diffusivity during the diffusion limited regime, and the maximum amount of product able to be formed were not related linearly to the mixture combinations. Addition of dicalcium silicate at approximately 20 wt. % caused a sharp alteration to these parameters, including reduced hydration rate and reaction layer permeability. These two factors lead to the prediction that more reaction products would be ultimately manufactured during the reactions at this composition.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 840: Symposium Q – Neutron and X-Ray Scattering as Probes of Multiscale Phenomena , 2004 , Q2.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tong, H.S., and Young, J.F., J. Am. Ceram. Soc. 60, 321 (1977).Google Scholar
2. Odler, I., and Schüppstuhl, J., J. Cem. Concr. Res. 12, 13 (1982).Google Scholar
3. Gartner, E.M., Young, J.F., Damidot, D.A., and Jawed, I., in Structure and Performance of Cements, Chapter three: hydration of Portland cement, edited by Bensted, J. and Barnes, P., (Spon Press, NY, 2002), pp. 57–108.Google Scholar
4. Taylor, H.F.W., in Cement Chemistry, (Thomas Telford, London, 1997), p. 114.Google Scholar
5. FitzGerald, S.A., Neumann, D.A., Rush, J.J., Bentz, D.P., and Livingston, R.A., Chem. Mater. 10, 397 (1998).Google Scholar
6. DAVE, National Institute of Standards and Technology Center for Neutron Research.Google Scholar
7. FitzGerald, S.A., Thomas, J.J., Neumann, D.A., and Livingston, R.A., Cem. Concr. Res. 32, 409 (2002).Google Scholar
8. Allen, A.J., McLaughlin, J.C., Neumann, D.A., and Livingston, R.A., J. Mater. Res. 19, 3242 (2004).Google Scholar
9. Thomas, J.J. and Jennings, H.M., Chem. Mater., 11, 1907, (1999).Google Scholar