Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T01:55:10.449Z Has data issue: false hasContentIssue false
  • English
  • Français

Interactions and Stability of Cu on CoSi2

Published online by Cambridge University Press:  25 February 2011

Y. -T. Shy ,
S. P. Murarka ,
A. R. Sitaram ,
P.-J. Ding  and
W. A. Lanford
Y. -T. Shy
Affiliation:
Materials Engineering Department and Center for Integrated Electronics, Rensselaer Polytechnic Institute, Troy, NY 12180
S. P. Murarka
Affiliation:
Materials Engineering Department and Center for Integrated Electronics, Rensselaer Polytechnic Institute, Troy, NY 12180
A. R. Sitaram
Affiliation:
Motorola Inc., Austin, TX 78721
P.-J. Ding
Affiliation:
Physics Department, State University of New York, Albany, NY 12222
W. A. Lanford
Affiliation:
Physics Department, State University of New York, Albany, NY 12222
Get access

Abstract

Copper is being investigated for application as multi-level interconnection metal in silicon ultra-large-scale integration (ULSI). On the other hand, COSi2 is being tested for application as contacts in sub-half micron ULSI circuits. Copper will thus be used on COSi2 to bring the electrical connection to the outside world. In this investigation we have therefore studied the interactions of copper with CoSi2 employing sheet resistance measurements (four-point probe), Rutherford back scattering (RBS), and X-ray diffraction (XRD). In addition the stability of the Schottky diodes, n-Si/CoS2/Cu, has been investigated as a function of the heat treatment in the range of room temperature to 600° C in argon-3% hydrogen mixture gas ambient. Both the measurements of the analytical and electrical characteristics show that Cu on n-Si/CoSi2 is stable at least up to a 30 minutes anneal at 600°C in argon-3% hydrogen medium. These results will be presented and discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 260: Symposium C – Advanced Metallization and Processing for Semiconductor Devices and Circuits , 1992 , 151
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pai, P. L. and Ting, C. H.. IEEE 1989 VMIC Conf., IEEE Cat.# 89TH0259–2, 258 (1989).Google Scholar
2. Murarka, S. P. and Peckerar, M. C., Electronic Materials Science and Technology, Academic Press, New York (1989).Google Scholar
3. Murarka, S. P.. J.Vac. Sci. Technol., B4, 1325 (1986).CrossRefGoogle Scholar
4. Hove, L. V., Wolters, R., Maex, K., De Keersmaecker, R., and Declerck, G. J.. IEEE Trans, on Electron Devices, ED-34, 554 (1987).CrossRefGoogle Scholar
5. Collins, C. B. and Carlson, R. O., Phys. Rev., 108, 1405 (1957).CrossRefGoogle Scholar
6. Sze, S. M. and Irvin, J. C., Solid State Electronics, 11, 599 (1968).CrossRefGoogle Scholar
7. Van Gurp, G. J. and Reukers, W. M., J. Appl. Phys., 50, 6923 (1979).CrossRefGoogle Scholar
8. Murarka, S. P., Suicides for VLSI Applications, Academic Press, New York (1983).Google Scholar
9. Poate, J. M., Tu, K. N., and Mayer, J. W., Thin Films-Interdiffusion and Reactions, Wiley-lnterscience, New York (1978).Google Scholar
10. Bhushan, B. and Murarka, S. P., “Stability of Cobalt Films on Silicon Dioxide Surfaces-- in Relation to Self-aligned Silicide Process” Unpublished.Google Scholar
11. Shepard, C. L., Lanford, W. A., Shy, Y. -T., and Murarka, S. P., Mat. Res. Soc. Symp. Proc, 181, 105(1990).CrossRefGoogle Scholar
12. Hansen, M., Constitution of Binary alloys, McGraw-Hill Book Company, NY (1958).CrossRefGoogle Scholar
13. Aboelfotoh, M. O., Cros, A., Svensson, B. G., and Tu, K. N., Physical Review B, 41, 9819 (1990).CrossRefGoogle Scholar