Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-25T15:40:18.618Z Has data issue: false hasContentIssue false

In-situ Observations of Martensitic Transformation in Pure Ti Thin Films using the Dynamical Transmission Electron Microscope (DTEM)

Published online by Cambridge University Press:  26 February 2011

Thomas Bradley LaGrange
Affiliation:
[email protected], Lawerence Livermore Natioan Laboratory, Chemistry and Materials Science, Materials Science and Technology Division, 7000 East Avenue, P.O. Box 808, Mail Stop, L-353, Livermore, CA, 94550, United States, (925) 454-0713
Geoffrey H. Campbell
Affiliation:
Jeffrey D. Colvin
Affiliation:
Wayne E. King
Affiliation:
Nigel D. Browning
Affiliation:
Michael R. Armstrong
Affiliation:
Bryan W. Reed
Affiliation:
Judy S. Kim
Affiliation:
Brent C. Stuart
Affiliation:
Get access

Abstract

We have measured the transient events of the α-β martensitic transformation in nanocrystalline Ti films via single shot electron diffraction patterns with 1.5 ns temporal resolution. This was accomplished with a newly constructed dynamic transmission electron microscope (DTEM), which combines pulsed laser systems and pump-probe techniques with a conventional TEM. The DTEM thereby enables studies of transformations that are (1) far too fast to be captured by conventional bulk techniques, and (2) difficult to study with current ultrafast electron diffraction (UED) instruments (which typically require an accumulation of multiple shots for each diffraction pattern). Martensitic transformations in nanocrystalline materials meet both criteria, with their rapid nucleation, characteristic interface velocities ∼1 km/s, and significant irreversible microstructural changes. Free-standing 40-nm-thick Ti films were laser-heated at a rate of ∼1010 K/s to a temperature above the 1155 K transition point, then probed at various time intervals with a 1.5-ns-long intense electron pulse. Diffraction patterns show an almost complete transition to the β phase within 500 ns. Post-mortem analysis (after the sample is allowed to cool) shows a reversion to the α phase coupled with substantial grain growth, lath formation, and texture modification. The cooled material also shows a complete lack of apparent dislocations, suggesting the possible importance of a "massive" short-range diffusion mechanism.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Smith, C. S., in Martensite, edited by Olson, G. B. and Owen, W. S., (ASM International, 1992) pp. 2139;Google Scholar
Raghavan, V. ibid pp. 197225.Google Scholar
2 Bostanjoglo, O., Elschner, R., Mao, Z., Nink, T. and Weingärtner, M., “Nanosecond electron microscopes,” Ultramicroscopy, 81 (3 - 4) (2000), 141147.Google Scholar
3 King, W. E., Campbell, G. H., Frank, A., Reed, B., Schmerge, J. F., Siwick, B. J., Stuart, B. C., and Weber, P. M., J. Appl. Phys., 97, 111101 (2005).Google Scholar
4 Lütjering, G. and Williams, J. C., in Titanium, (Springer-Verlag Berlin Heidelberg, NewYork, 2003) p. 27.Google Scholar
5 6. OH, M.S., Lee, J. Y., and Park, J. K., Metall. and Mat. Trans. A, 35A, 3071 (2004).Google Scholar
6 Cormier, M. adn Claisse, F., Journal of Less-Common Metals, 34, 181 (1974).Google Scholar
7 Campbell, G. H., LaGrange, T. B., King, W. E., Colvin, J. D., Ziegler, A., Browning, N. D., Kleinschmidt, H.., and Bostanjaglo, O., in Proceeding of the Solid-Solid Phase Transformations in Inorganic Materials Conference 2005, (TMS, Warrendale PA, 2005).Google Scholar