Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T09:35:04.420Z Has data issue: false hasContentIssue false
  • English
  • Français

In‐Situ Measurements of Thermal Properties of Dielectric Films on Metal‐Dielectric‐Substrate Structures

Published online by Cambridge University Press:  10 February 2011

P. Bloss ,
A.S. De Reggi  and
H. Schäfer
P. Bloss
Affiliation:
National Institute of Standards and Technology, Gaithersburg, MD 20899, USA pbloss@enh .nist.gov
A.S. De Reggi
Affiliation:
National Institute of Standards and Technology, Gaithersburg, MD 20899, USA pbloss@enh .nist.gov
H. Schäfer
Affiliation:
Physics Department, Leipzig University, Linnéstra? 5, D‐04103 Leipzig, GERMANY
Get access

Abstract

We show that the thermal diffusivity of a dielectric film and the heat‐transfer coefficient between the film and the substrate to which it is adhesively bonded can be determined from the electret‐like response stimulated by laser pulses applied to the voltage‐biased dielectric. The temperature profile is calculated as a function of time from the heat‐conduction equation with boundary conditions appropriate for the model structure representing the metallic electrode/ dielectric film/ glue layer/ substrate structure. The electrode, acting as a thermal mass, and the substrate, acting as a thermal sink, affect the temperature profile in different time ranges.

The response is a convolution of the temperature and the electric‐field profiles across the dielectric. For nonideal dielectrics that acquire bulk charge under bias, deconvolution is necesssary to determine the field profile and the thermal properties. Deconvolution is accomplished using the Tikhonov‐regularization technique with a self‐consistent regularization parameter. This procedure yields information about the thermal properties of both the dielectric and the glue joint, as shown by actual measurements.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 445: Electronic Packaging Materials Science IX , 1996 , 179
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 DeReggi, A.S. and Bauer, S., Proceedings of the CEIDP 95. pp.536–539.Google Scholar
2 Agar, Y., Ueda, A., and Nagai, S., J. Polym. Sci.: B: Polymer Physics 33, 33 (1995).Google Scholar
3 Tikhonov, A.N. and Arsenin, V.Y., Solution of I11‐posed Problems. (John Wiley & Sons, New York, 1977).Google Scholar
4 Ploss, B. and Bianzano, O., Proceedings of the ISE‐8. Paris, 1994, p.206.Google Scholar
5 Carslaw, H.S. and Jaeger, J.C., Conductionof Heat in Solids. 2nd ed., (Clarendon Press, Oxford, 1995).Google Scholar
6 Bloß, P. DeReggi, A.S., and Schäfer, H., prepared for publication.Google Scholar
7 Honerkamp, J. and Weese, J., Continuum Mech. Thermod. 2, 17 (1990).Google Scholar
8 Weese, J., Comput. Phys. Commun. 69, 99 (1992).Google Scholar
9 Bloß, P. and Schäfer, H., Rev. Sci. Instr. 65, 1541 (1994).Google Scholar
10 Bloß, P. Steffen, M., Schäfer, H., Yang, G.‐M., and Sessler, G.M., IEEE Trans. Diel. Electr. Insul. 3, 182 (1996).Google Scholar
11 Bloß, P. Steffen, M., Schäfer, H., Eberle, G., and Eisenmenger, W., IEEE Trans. Diel. Electr. Insul. 3, 417 (1996).Google Scholar
12 Commercial names are used to identify the materials used in a traceable manner. Such use does not employed endorsement or recommendation by NIST.Google Scholar
13 Handbook of Chemistry and Physics. 75th ed., Lide, D.R., (CRC Press, Boca Raton, 1994).Google Scholar
14 DeReggi, A.S., Guttman, C.M., Mopsik, F.I., Davis, G.T., and Broadhurst, M.G., Phys. Rev. Lett. 40, 413 (1978).Google Scholar
15 Bloß, P. DeReggi, A.S., and Schäfer, H., Proceedings of the ISE‐9. Shanghai, September 1996.Google Scholar
16 Information sheet supplied by DuPont with the Kapton™ foils.Google Scholar