Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-23T15:35:58.504Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of Surface Preparation on Scanning Kelvin Probe Microscopy and Electron Backscatter Diffraction Analysis of Cross Sections of CdTe/CdS Solar Cells

Published online by Cambridge University Press:  07 July 2011

H.R. Moutinho ,
R.G. Dhere ,
C.-S. Jiang  and
M.M. Al-Jassim
H.R. Moutinho
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
R.G. Dhere
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
C.-S. Jiang
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
M.M. Al-Jassim
Affiliation:
National Renewable Energy Laboratory, Golden, CO 80401, USA
Get access

Abstract

Electron backscatter diffraction (EBSD) provides information on the crystallographic structure of a sample, while scanning Kelvin probe microscopy (SKPM) provides information on its electrical properties. The advantage of these techniques is their high spatial resolution, which cannot be attained with any other techniques. However, because these techniques analyze the top layers of the sample, surface or cross section features directly influence the results of the measurements, and sample preparation is a main step in the analysis.

In this work we investigated different methods to prepare cross sections of CdTe/CdS solar cells for EBSD and SKPM analyses. We observed that procedures used to prepare surfaces for EBSD are not suitable to prepare cross sections, and we were able to develop a process using polishing and ion-beam milling. This process resulted in very good results and allowed us to reveal important aspects of the cross section of the CdTe films. For SKPM, polishing and a light ion-beam milling resulted in cross sections that provided good data. We were able to observe the depletion region on the CdTe film and the p-n junction as well as the interdiffusion layer between CdTe and CdS. However, preparing good-quality cross sections for SKPM is not a reproducible process, and artifacts are often observed.

Keywords

electrical propertiescrystallographic structureII-VI
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1324: Symposium D – Compound Semiconductors for Energy Applications and Environmental Sustainability , 2011 , mrss11-1324-d14-02
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dingley, D. J. and Field, D. P., Mater. Sci. Technol. 13, 69 (1997).Google Scholar
2. Rosenthal, P. A. and Yu, E. T., J. Appl. Phys. 87, 1937 (2000).Google Scholar
3. Moutinho, H. R., Dhere, R. G., Romero, M. J., Jiang, C.-S., To, B., and Al-Jassim, M. M., J. Vac. Sci. Technol. A 26, 1068 (2008).Google Scholar
4. Yan, Y. and Al-Jassim, M. M., J. Appl. Phys. 90, 3952 (2001).Google Scholar
5. Quadros, J., Pinto, A. L., Moutinho, H. R., Dhere, R. G., and Cruz, L. R., J. Mater. Sci. 43, 573 (2008).Google Scholar
6. Moutinho, H. R., Dhere, R. G., Jiang, C.-S., Yan, Y., Albin, D. S., and Al-Jassim, M. M., J. Appl. Phys. 108, 074503 (2010).Google Scholar