Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T01:52:18.107Z Has data issue: false hasContentIssue false
  • English
  • Français

The Influence of Reinforcing Fibers on the Morphology and Crystallization of Thermoplastic Polymer Composites

Published online by Cambridge University Press:  21 February 2011

Ludwig Rebenfeld ,
Glenn P. Desio  and
Veronika E. Reinsch
Ludwig Rebenfeld
Affiliation:
TRI/Princeton, and Department of Chemical Engineering, Princeton University, P.O. Box 625, Princeton, New Jersey 08542, USA
Glenn P. Desio
Affiliation:
TRI/Princeton, and Department of Chemical Engineering, Princeton University, P.O. Box 625, Princeton, New Jersey 08542, USA
Veronika E. Reinsch
Affiliation:
TRI/Princeton, and Department of Chemical Engineering, Princeton University, P.O. Box 625, Princeton, New Jersey 08542, USA
Get access

Abstract

Semi-crystalline thermoplastic polymers are being used increasingly as matrices in high performance fiber reinforced composites. The crystallization kinetics and morphology of these polymers have been studied extensively, but relatively little attention has been given to the effects of the reinforcing fibers on the crystallization process.

We have studied the effects of glass, carbon and aramid fibers on the rates of crystallization, the degree of crystallinity, and the glass transition temperature of such typical thermoplastics as poly(phenylene sulfide) and poly(ethylene terephthalate). Based on the isothermal crystallization studies using DSC, we find that, in general, reinforcing fibers increase the rates of crystallization and decrease the degree of crystallinity, the extent of these effects being dependent on the weight fraction of fiber in the composite, the specific type of fiber, and the nature of surface finishes (sizes) that may have been applied.

The spherulitic morphology that develops in these polymers during the crystallization process, as characterized by polarized light microscopy, is also affected by the reinforcing fibers. In many cases, transcrystalline regions develop near the fiber surface due to nucleation effects.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 255: Symposium Z – Hierarchically Structured Materials , 1991 , 129
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hobbs, S.Y., Nature Physical Science 234(44), 12 (1971).Google Scholar
2. Lee, Y. and Porter, R.S., Polymer Eng. Sci. 26(9), 633 (1986).Google Scholar
3. Lopez, L. C. and Wilkes, G. L., Polymer 29, 106 (1988) and 30, 882 (1989).Google Scholar
4. Cheng, S. Z. D., Wu, Z. Q. and Wunderlich, B., Macromolecules 20, 2802–2810 (1987).Google Scholar
5. Ma, C. C. M., Hu, J. T., Liu, W. L., Liu, R. S., Hsia, H. C. and Shieh, B. Y., Polymer Composites 8, 256–264 (1987); and Proceedings 31st International SAMPE Symposium, pp 420–433 (1986).Google Scholar
6. Johnson, T. W. and Ryan, C. L., Proceedings 31st International SAMPE Symposium, pp 1537–1547 (1986).Google Scholar
7. Jog, J. P. and Nadkarni, V. M., J. Appl. Polym. Sci. 30, 997 (1985).CrossRefGoogle Scholar
8. Desio, G. P. and Rebenfeld, L., J. Appl. Polym. Sci. 39, 825 (1990).CrossRefGoogle Scholar
9. Rebenfeld, L., Desio, G. P. and Wu, J. C., J. Appl. Polym. Sci. 42, 801 (1991).Google Scholar
10. Desio, G. P. and Rebenfeld, L., J. Appl. Polym. Sci. (in press).Google Scholar