Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-29T08:00:06.859Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of a Capping Layer on the Mechanical Properties of Copper Films

Published online by Cambridge University Press:  21 February 2011

R.-M. Keller ,
S. Bader ,
R. P. Vinci  and
E. Arzt
R.-M. Keller
Affiliation:
Max-Planck-Institut für Metallforschung and University of Stuttgart, Seestr. 92, 70174 Stuttgart, Germany
S. Bader
Affiliation:
Max-Planck-Institut für Metallforschung and University of Stuttgart, Seestr. 92, 70174 Stuttgart, Germany
R. P. Vinci
Affiliation:
Department of Materials Science and Eng., Stanford University, Stanford, CA 94305–2205
E. Arzt
Affiliation:
Max-Planck-Institut für Metallforschung and University of Stuttgart, Seestr. 92, 70174 Stuttgart, Germany
Get access

Abstract

The substrate curvature technique was employed to study the mechanical properties of 0.6 μm and 1.0 μm Cu films capped with a 50 nm thick Si3N4 layer and to compare them with the mechanical properties of uncapped Cu films. The microstructures of these films were also investigated. Grain growth, diffusional creep and dislocation processes are impeded by the cap layer. This is evident in the form of high stresses at high temperatures on heating and at low temperatures on cooling. At intermediate temperatures on heating and cooling, stress plateaus a relatively low stresses exist. This can be explained by the so-called Bauschinger effect. A film thickness dependence of the stresses in the film could not be observed for capped Cu films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 356: Symposium B2 – Thin Films: Stresses and Mechanical Properties V , 1994 , 453
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Flinn, P.A., J. Mater. Res. 6, 1498 (1991)Google Scholar
[2] Vinci, R.P. and Bravman, J. C., Mat. Res. Soc. Symp. Proc. 309, 269 (1993)Google Scholar
[3] Vinci, R.P., Ph. D. thesis, Stanford University, 1994 Google Scholar
[4] Hu, C.-K., Chang, S., Small, M.B. and Lewis, J.E., IEEE Proceedings of the 3rd International VLSI Multilevel Interconnecton Conference, June 9–10, 1986, p. 181Google Scholar
[5] Park, C.W. and Vook, R.W., Appl. Phys. Lett. 59, 175 (1991)Google Scholar
[6] Flinn, P.A., Gardner, D.S. and Nix, W.D., IEEE Transactions on Electron Devices ED–34 (3), 689 (1987).Google Scholar
[7] Stoney, G., Proc. R. Soc. A 82, 172 (1909).Google Scholar
[8] Turlo, J.F., Ph.D. thesis, Stanford University, 1992 Google Scholar
[9] Thouless, M.D., Gupta, J. and Harper, J.M.E.. J. Mater. Res. 8, 1845 (1993).Google Scholar
[10] Sleewyk, A. W. and Kemerink, G. J., Scripta Metallurgica 19, 471 (1985)Google Scholar
[11] Scholtes, B. und Vöhringer, O., Metallkde, Z.. 77, 595 (1986)Google Scholar