Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T07:43:27.295Z Has data issue: false hasContentIssue false

Hydrogenated Amorphous Silicon and Silicon Nitride Deposited at less than 100° C by ECR-PECVD for Thin Film Transistors

Published online by Cambridge University Press:  17 March 2011

Andrew J. Flewitt
Affiliation:
Engineering Department, Cambridge University, Cambridge, CB2 1PZ, U.K.
Andrew P. Dyson
Affiliation:
Engineering Department, Cambridge University, Cambridge, CB2 1PZ, U.K.
John Robertson
Affiliation:
Engineering Department, Cambridge University, Cambridge, CB2 1PZ, U.K.
William I. Milne
Affiliation:
Engineering Department, Cambridge University, Cambridge, CB2 1PZ, U.K.
Get access

Abstract

A systematic study has been made of the growth of both hydrogenated amorphous silicon (a-Si:H) and silicon nitride (a-SiN) by electron cyclotron resonance plasma enhanced chemical vapour deposition (ECR-PECVD). In the case of a-SiN, helium and nitrogen gas is injected into the system such that it passes through the resonance zone. These highly ionised gases provide sufficient energy to ionise the silane gas, which is injected further downstream. It is demonstrated that a gas phase reaction occurs between the silane and nitrogen species. It is control of the ratio of silane to nitrogen in the plasma which is critical for the production of stoichiometric a-SiN. Material has been produced at 80 °C with a Si:N ratio of 1:1.3 a breakdown strength of ∼6 MV cm−1 and resistivity of >1014 Ωcm. In the case of a-Si:H, helium and hydrogen gas is injected into the ECR zone and silane is injected downstream. It is shown that control of the gas phase reactions is critical in this process also. a-Si:H has been deposited at 80 °C with a dark conductivity of 10−11 Ω−1 cm−1 and a photosensitivity of just below 4×104. Such materials are suitable for use in thin film transistors on plastic substrates.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kanicki, J. and Voke, N., Mat. Res. Soc. Symp. Proc., 68, 167; 175 (1986).Google Scholar
2. Smith, D. L., Alimonda, A. S., Chen, C-C., Ready, S.E. and Wacker, B., J. Electrochem. Soc., 137, 614 (1990).Google Scholar
3. Murley, D., French, I., Deane, S. and Gibson, R., J. Non-Cryst. Solids, 198–200, 1058 (1996).Google Scholar
4. Robertson, R. and Gallagher, A., J. Appl. Phys., 59, 3402 (1986).Google Scholar
5. Robertson, J., J. Appl. Phys., 87, 2608 (2000).Google Scholar
6. Manabe, Y. and Mitsuyu, T., J. Appl. Phys., 66, 2475 (1989).Google Scholar
7. Flemish, J. R. and Pfeffer, P. L., J. Appl. Phys., 74, 3277 (1993).Google Scholar
8. Sitbon, S., Hugon, M. C., Agius, B., Abel, F., Courant, J. L. and Puech, M., J. Vac. Sci. Technol. A, 13, 2900 (1995).Google Scholar
9. Lee, J-H., Park, S. K. and Kim, C. S., Jpn. J. Appl. Phys. Pt. 2, 34, L119 (1995).Google Scholar
10. Ueda, Y., Inoue, Y., Shinohara, S. and Kawai, Y., Vacuum, 48, 119 (1997).Google Scholar
11. Langford, A. A., Fleet, M. L., Nelson, B. P., Lanford, W. A. and Maley, N., Phys. Rev. B, 45, 13367 (1992).Google Scholar
12. Kushner, M. J., J. Appl. Phys., 74, 6538 (1993).Google Scholar
13. CRC Handbook of Chemistry and Physics, 76th Edition, ed. Lide, D. R., (CRC Press, 1995) p. 955.Google Scholar
14. Montgomery, D. C., Design and Analysis of Experiments, 4th Edition (Wiley, 1997) 420421.Google Scholar