Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-10T00:47:05.005Z Has data issue: false hasContentIssue false
  • English
  • Français

The High Temperature Degradation of Cd-Zn and Pb-Cd Eutectic Alloys

Published online by Cambridge University Press:  15 February 2011

R. H. van de Merwe  and
R. W. Smith
R. H. van de Merwe
Affiliation:
Queen's University, Kingston, Canada
R. W. Smith
Affiliation:
Queen's University, Kingston, Canada
Get access

Abstract

Various thermal treatments have been applied to Cd-Zn and Pb-Cd eutectic alloys in an attempt to better understand the thermal stability of eutectics close to their melting temperatures. Specimens of each system were grown at 40, 400 and 4000 mm/hr to obtain microstructures which were either lamellar, lamellar/cellular, or cellular. These specimens were thermally treated by either: (1) isothermal annealing at 0.95 Tm (up to 192 hrs), (2) thermal cycling between room temperature and 0.95 Tm (up to 64 cycles), (3) exposing to thermal gradients parallel to the growth direction and maintaining one end of the specimen at 0.95 Tm and the opposite end at room temperature (up to 48 hrs). It was found in all cases that some microstructural changes occurred but that the two alloy systems displayed marked differences in degradation sequence. An explanation and interpretation of these decay sequences is attempted. The mechanical properties of the variouslytreated alloy specimens were determined and are correlated with the observed microstructural features. The Cd-Zn specimens coarsened more rapidly than equivalent Pb-Cd specimens, as might be expected since the interphase boundary energies have been reported as 86 and 67 erg/cm2 respectively.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 12: Symposium L – In Situ Composites IV , 1981 , 291
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Weatherly, G. C., Treatise on Materials Science and Technology, 9, (1975), 121.Google Scholar
2. Hertzberg, R. W. Fiber Composite Materials, A.S.M., (1964), 77.Google Scholar
3.. Thompson, E. R., Lemkey, F. D., Composite Materials, 4, (1974), 101.Google Scholar
4. Delamore, G. W., van de Merwe, R. H., Sahoo, M. and Smith, R. W., J. Mat. Sci., 13, (1978), 282.Google Scholar
5. McQueen, H., Engineering Journal, Nov., (1965), 30.Google Scholar
6. Hale, D. K., Kelly, A., Annual Review Materials Science, 2, (1972), 405.Google Scholar
7. Sutton, W., J. Chome, Met. Eng. Q-3, 1 (1963), 44.Google Scholar
8. Cratchley, D., Baker, A. A., Metallurgica, 69, (1964), 153.Google Scholar
9. Sahoo, M., Smith, R. W., J. Mat. Sci., 13, (1978), 283.Google Scholar
10. Flanders, N. A., Taplin, D. M. R., Kwerr, H. W., J. Mat. Sci., 11, (1976), 2051.CrossRefGoogle Scholar
11. Cantor, B., Chadwick, G. A., J. Crys. Growth, 36, (1976), 232.Google Scholar
12. Barclay, R. S., Winegard, W. C., Mat. Sci. Eng., 13, (1974), 291.Google Scholar
13. van de Merwe, R., Sahoo, M., Smith, R. W., Conference on In-Situ Composites- III (1979)1107.Google Scholar
14. Smith, C. S., Guttman, L., Trans. AIME, (1953), 81.Google Scholar
15. Graham, L. D., Kraft, R. W., Trans. AIME, 234, (1966), 94.Google Scholar
16. Tiller, W. A., Mrdjenovich, R., J. Appl. Phys., 34, (1963), 3639.Google Scholar
17. Sahoo, M., Porter, R. A., Smith, R. W., J. Mat. Sci., 1, (1976), 11680.Google Scholar
18. Shaw, B. J., Acta. Met., 15, (1967), 169.Google Scholar
19. Hunt, J. D., Chilton, J. P., J. Inst. Metals, 91, (1962), 338.Google Scholar
20. Straumans, W., Brakss, N., Z. Phys. Chem., 308, (1935), 117.Google Scholar
21. Double, D., Hellawell, A., J. Crystal Growth, 6, (1969), 1197.CrossRefGoogle Scholar
22. Chadwick, G. A., J. Inst. Metals, 92, (1963), 18.Google Scholar
23. van Suchtelen, J., J. Crys. Growth, 43 (1978), 28.Google Scholar
24. Moore, A., Elliott, R., The Solidification of Metals, ISI, London, (1967), 67.Google Scholar
25. Shewmon, P. G., Diffusion in Solids, McGraw-Hill Book Co., (1963), 188.Google Scholar
26. Nakasawa, Y., Weatherly, G. C., Met. Trans., 3, (1972), 3223.Google Scholar
27. Brooks, H., Metal Interfaces, ASM, (1952), 20.Google Scholar
28. Kraft, R. W., Trans. Met. Soc. AIME, 224, (1962), 65.Google Scholar
29. Coleman, R. V., Price, B., Canbera, N., J. Appl. Phys., 28, (1957), 1360.Google Scholar
30. Barrett, C. S., Massalski, T. B., Structure of Metals, McGraw-Hill Inc., (1966).Google Scholar
31. Garmons, G., Met. Trans., 5, (1974), 2183.CrossRefGoogle Scholar