Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-26T21:09:18.981Z Has data issue: false hasContentIssue false
  • English
  • Français

Heterogeneous Integration of LSI Amplifier and the Tactile Sensor Using Stacking and Through-Si-Via Techniques

Published online by Cambridge University Press:  15 June 2012

Masayuki Sohgawa ,
Hokuto Yokoyama ,
Takeshi Kanashima ,
Masanori Okuyama  and
Haruo Noma
Masayuki Sohgawa
Affiliation:
Osaka University, 1-3 Machikaneyamacho, Toyonaka, Osaka 560-8531, Japan.
Hokuto Yokoyama
Affiliation:
Osaka University, 1-3 Machikaneyamacho, Toyonaka, Osaka 560-8531, Japan.
Takeshi Kanashima
Affiliation:
Osaka University, 1-3 Machikaneyamacho, Toyonaka, Osaka 560-8531, Japan.
Masanori Okuyama
Affiliation:
Osaka University, 1-3 Machikaneyamacho, Toyonaka, Osaka 560-8531, Japan.
Haruo Noma
Affiliation:
Advanced Telecommunications Research Institute International, 2-2-2 Hikaridai, Seika, Soraku, Kyoto 619-0288, Japan.
Get access

Abstract

We have developed the tactile sensor using the microcantilevers with strain gauge film which can detect normal and shear forces simultaneously. In this work, the tactile sensor and the IC amplifier have been integrated heterogeneously to shorten the wire length by chip-on-chip stacking and reduce the noise in the output voltage. Standard deviation of the noise can be reduced from 27.6 mV to 3.3 mV by heterogeneous integration of the tactile sensor and the IC amplifier using Au wire bonding. By this heterogeneous integration, the device size and wiring numbers can be reduced, and installation of more sensors is allowed on fingertips of the robot. Moreover, through-silicon-via (TSV) holes were fabricated to mount an IC amplifier on the backside of the sensor chip, instead of using Au wires. Although TSV can be fabricated successfully, resistance to sacrificial etching process is problem. As a result, Si3N4 used instead of SiO2 has improved insulation between TSVs.

Keywords

sensormicroelectro-mechanical (MEMS)packaging
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1427: Symposium B – Heterogeneous Integration Challenges of MEMS, Sensor and CMOS LSI , 2012 , mrss12-1427-b03-03
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Onishi, H., Tachibana, H., Huang, Y. M., Sohgawa, M., Kanashima, T., Okuyama, M., Yamashita, K., Noda, M., and Noma, H., IEEJ Trans. Sens. Micromachines 129, 411–416 (2009).Google Scholar
2. Sohgawa, M., Uematsu, T., Mito, W., Kanashima, T., Okuyama, M., and Noma, H., Jpn. J. Appl. Phys. 50, 06GM08 (2011).Google Scholar
3. Hirashima, D., Uematsu, T., Sohgawa, M., Mito, W., Kanashima, T., Okuyama, M., and Noma, H., Jpn. J. Appl. Phys. 50, 06GM02 (2011).Google Scholar
4. Sohgawa, M., Hirashima, D., Moriguchi, Y., Uematsu, T., Mito, W., Kanashima, T., Okuyama, M., and Noma, H., Sens. Act. A (2012) (in press).Google Scholar
5.“Smithells Metals Reference Book”, ed. Brandes, E. A. and Brook, G. B. (Butterworth-Heinemann, 1992) p. 14–1.Google Scholar